Server User Manual
Table Of Contents
- Network User’s Guide
- Applicable models
- Definitions of notes
- IMPORTANT NOTE
- Table of Contents
- Section I: Network Operation
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network (For HL-5470DW(T) and HL-6180DW(T))
- Overview
- Confirm your network environment
- Wireless configuration temporarily using a USB cable (Recommended for Windows®)
- Configuration using the machine’s control panel Setup Wizard
- One push configuration using WPS (Wi-Fi Protected Setup) or AOSS™
- Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)
- Configuration in Ad-hoc mode (For IEEE 802.11b)
- 4 Control panel setup
- Overview
- Network menu (For HL-5470DW(T) and HL-6180DW(T))
- Reset the network settings to the factory default
- Printing the Printer Settings Page (For HL-5450DN(T))
- Printing the Network Configuration Report (For HL-5470DW(T) and HL-6180DW(T))
- Printing the WLAN report (For HL-5470DW(T) and HL-6180DW(T))
- Function table and default factory settings
- 5 Web Based Management
- 6 Security features
- Overview
- Managing your network machine securely using SSL/TLS
- Secure Management using BRAdmin Professional 3 (Windows®)
- Printing documents securely using SSL/TLS
- Sending an E-mail securely
- Using IEEE 802.1x authentication
- Using Certificates for device security
- Managing multiple certificates
- 7 Troubleshooting
- Section II: Network Glossary
- 8 Types of network connections and protocols
- 9 Configuring your machine for a network
- 10 Wireless network terms and concepts (For HL-5470DW(T) and HL-6180DW(T))
- 11 Additional network settings from Windows®
- Types of additional network settings
- Installing drivers used for printing via Web Services (Windows Vista® and Windows® 7)
- Uninstalling drivers used for printing via Web Services (Windows Vista® and Windows® 7)
- Network printing installation for Infrastructure mode when using Vertical Pairing (Windows® 7)
- 12 Security terms and concepts
- Section III: Appendixes
- Index
82
Troubleshooting
7
Did your previous printing
job fail?
wired/
wireless
If the failed printing job is still in the print queue of your computer, delete
it.
Double-click the printer icon in the following folder and then choose the
Cancel All Documents in the Printer menu:
(Windows
®
XP/Windows Server
®
2003)
Start and Printers and Faxes.
(Windows Vista
®
)
, Control Panel, Hardware and Sound and then Printers.
(Windows
®
7)
, Devices and Printers and then Printers and Faxes.
(Windows Server
®
2008)
Start, Control Panel and Printers.
Are you connecting the
Brother machine to the
network using wireless
capabilities?
wireless Print the WLAN report to confirm the state of the wireless connection.
(For how to print, see Printing the WLAN report (For HL-5470DW(T) and
HL-6180DW(T)) uu page 42.)
If there is an error code on the printed WLAN report: uu Quick Setup
Guide: Troubleshooting.
See The Brother machine is not found on the network during the printer
driver installation. uu page 79.
I have checked and tried all
of above, however the
Brother machine does not
print. Is there anything else I
can do?
wired/
wireless
Uninstall the printer driver and reinstall it.
I'm using security software.
Question Interface Solution
Did you choose to accept
the security alert dialog
during the printer driver
installation, applications'
start-up process or when
using the printing features?
wired/
wireless
If you did not choose to accept the security alert dialog, the firewall function
of your security software may be rejecting access. Some security software
might block access without showing a security alert dialog. To allow access,
see the instructions of your security software or ask the manufacturer.
The Brother machine cannot print over the network.
The Brother machine is not found on the network even after successful installation. (continued)
Question Interface Solution