Server User Manual
Table Of Contents
- Network User’s Guide
- Applicable models
- Definitions of notes
- IMPORTANT NOTE
- Table of Contents
- Section I: Network Operation
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network (For HL-5470DW(T) and HL-6180DW(T))
- Overview
- Confirm your network environment
- Wireless configuration temporarily using a USB cable (Recommended for Windows®)
- Configuration using the machine’s control panel Setup Wizard
- One push configuration using WPS (Wi-Fi Protected Setup) or AOSS™
- Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)
- Configuration in Ad-hoc mode (For IEEE 802.11b)
- 4 Control panel setup
- Overview
- Network menu (For HL-5470DW(T) and HL-6180DW(T))
- Reset the network settings to the factory default
- Printing the Printer Settings Page (For HL-5450DN(T))
- Printing the Network Configuration Report (For HL-5470DW(T) and HL-6180DW(T))
- Printing the WLAN report (For HL-5470DW(T) and HL-6180DW(T))
- Function table and default factory settings
- 5 Web Based Management
- 6 Security features
- Overview
- Managing your network machine securely using SSL/TLS
- Secure Management using BRAdmin Professional 3 (Windows®)
- Printing documents securely using SSL/TLS
- Sending an E-mail securely
- Using IEEE 802.1x authentication
- Using Certificates for device security
- Managing multiple certificates
- 7 Troubleshooting
- Section II: Network Glossary
- 8 Types of network connections and protocols
- 9 Configuring your machine for a network
- 10 Wireless network terms and concepts (For HL-5470DW(T) and HL-6180DW(T))
- 11 Additional network settings from Windows®
- Types of additional network settings
- Installing drivers used for printing via Web Services (Windows Vista® and Windows® 7)
- Uninstalling drivers used for printing via Web Services (Windows Vista® and Windows® 7)
- Network printing installation for Infrastructure mode when using Vertical Pairing (Windows® 7)
- 12 Security terms and concepts
- Section III: Appendixes
- Index
57
6
6
Overview 6
In today’s world there are many security threats to your network and the data that travels over it. Your Brother
machine employs some of the latest network security and encryption protocols available today. These
network features can be integrated into your overall network security plan to help protect your data and
prevent unauthorized access to the machine. This chapter explains how to configure them.
You can configure the following security features:
Managing your network machine securely using SSL/TLS (See Managing your network machine securely
using SSL/TLS uu page 58.)
Managing your network machine securely using SNMPv3 protocol (See Secure Management using
Web Based Management (web browser) uu page 58 or Secure Management using BRAdmin
Professional 3 (Windows
®
) uu page 60.)
Secure Management using BRAdmin Professional 3 (Windows
®
) (See Secure Management using
BRAdmin Professional 3 (Windows
®
) uu page 60.)
Printing documents securely using SSL/TLS (See Printing documents securely using SSL/TLS
uu page 61.)
Sending an E-mail securely (See Sending an E-mail securely uu page 62.)
Using IEEE 802.1x authentication (See Using IEEE 802.1x authentication uu page 64.)
Certificate for secure management (See Using Certificates for device security uu page 66.)
Managing multiple certificates (See Managing multiple certificates uu page 76.)
Note
We recommend to disable the Telnet, FTP and TFTP protocols. Accessing the machine using these
protocols is not secure. (For how to configure the protocol settings, see How to configure the machine
settings using Web Based Management (web browser) uu page 46.)
Security features 6