Brother Mobile Full Color Inkjet Printer MP-21C/CDX User’s Guide Please read this manual thoroughly before using the printer. Keep this manual in a convenient place for quick and easy reference at all times.
Shipment of the Printer If for any reason you must ship your Printer, carefully package the Printer to avoid any damage during transit. It is recommended that you save and use the original packaging. The Printer should also be adequately insured with the carrier. Warning When shipping the Printer, DO NOT remove the INK CARTRIDGES from the Printer. Failure to fit the ink cartridges into the Printer during shipping will cause severe damage to the Printer and will VOID THE WARRANTY.
(For USA & CANADA Only) For technical and operational assistance, please call: In USA In Canada 1-877-284-3238 949-859-9700 Ext. 329 1-800-853-6660 514-685-6464 (outside California) (within California) (within Montreal) If you have comments or suggestions, please write us at: In USA In Canada Printer Customer Support Brother International Corporation 15 Musick Irvine, CA 92618 Brother International Corporation, Ltd. 1, Rue Hôtel De Ville Dollard-des-Ormeaux P.Q.
UJ5351001 Printed in Japan
Mobile Full Color Inkjet Printer MP-21C/CDX USER’S GUIDE (For USA & CANADA Only) For technical and operational assistance, please call: In USA In CANADA 1-877-284-32387746 949-859-9700 Ext. 329 1-800-853-6660 514-685-6464 (outside California) (within California) (within Montreal) If you have comments or suggestions, please write us at: In USA In CANADA Printer Customer Support Brother International Corporation 15 Musick Irvine, CA 92718 Brother International Corporation (Canada), Ltd.
Trademarks The brother logo is a registered trademark of Brother Industries, Ltd. Windows is a trademark of Microsoft Corporation. All other brand and product names mentioned in this User’s Guide are registered trademarks of their respective companies. Compilation and Publication Notice Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product’s descriptions and specifications.
Definitions of Warnings, Cautions, and Notes The following conventions are used in this User’s Guide: Warning Indicates warnings that must be observed to prevent possible personal injury. ! Caution Indicates cautions that must be observed to use the printer properly or prevent damage to the printer. ✒ Note Indicates notes and useful tips to remember when using the printer. To Use the Printer Safely Warning DO NOT put your hands into the printer while it is printing to avoid causing injury. Fig.
Warning Before cleaning the printer platen, be sure to turn off the (On/Off) button and make sure that all the LEDs are off. Remove the Printer Interface Card Cable and AC Adapter if connected (MP-21CDX or optional PA-21MP users only) from the printer. Warning DO NOT put your hands into the printer or move the carriage by hand. The printer may move the carriage by itself and cause injury. Warning DO NOT push the shutters in the ink cartridge slot with your fingers.
! Caution DO NOT touch the flat cable and Ink Tube. Fig. 0-2 The Flat Cable and Ink Tube ! Caution Keep the printer on a flat surface. ! Caution DO NOT move or shake the printer while it is printing. ! Caution Do not disassemble the printer. ! Caution DO NOT remove the Printer Interface Card, PC card cable or AC Adapter if connected (MP-21CDX or optional PA-21MP users only) while the printer LEDs are on or blinking.
! Caution If the printer get wet, wait until it dries out completely before attempting to print. ! Caution If you drop the printer, check that there are no broken parts. If you find some parts broken, consult your dealer or our authorized service representative. ✒ Note We recommend you select the status monitor ON when you use the printer.
Printer Do's and Don't When Traveling ! Caution DO NOT leave the printer inside your car. ! Caution DO NOT shake or damage the printer. ! Caution When you carry the printer keep it upright. ! Caution When you travel by air, do not put the printer in your suitcase. Carry the printer onto the aircraft as hand baggage. ! Caution When you carry the printer, keep the ink cartridges installed.
USER’S GUIDE TABLE OF CONTENTS CHAPTER 1 INTRODUCTION ABOUT THE GUIDEBOOKS 1-1 ABOUT YOUR PRINTER Printer Overview Features Operating and Storage Environment 1-2 1-2 1-3 1-4 CHAPTER 2 PAPER HANDLING PAPER SPECIFICATIONS 2-1 ABOUT BROTHER SPECIAL PAPER About Brother Special Coated Paper About Brother Special Glossy Paper 2-4 2-4 2-5 LOADING PAPER 2-6 How to Load Paper in the Paper Feeding Slot 2-6 How to Load Paper in the Straight Paper Path Slot 2-7 How to Load Envelopes in the Straight Paper Path
TABLE OF CONTENTS CHAPTER 5 TROUBLE SHOOTING ALARM INDICATIONS AT A GLANCE Operator Calls Service Calls 5-1 5-1 5-2 PAPER JAMS How to clear paper jams 5-3 5-3 Q&A Setting Up the Printer Hardware Setting Up the Printer for Windows Paper Handling Printing Print Quality 5-5 5-5 5-6 5-7 5-8 5-9 APPENDIX PRINTER SPECIFICATIONS Printing Controller Electrical and Mechanical Print Media Appendix-1 Appendix-1 Appemdix-1 Appendix-2 Appendix-2 ix
USER’S GUIDE IMPORTANT INFORMATION: REGULATIONS Federal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only) Responsible Party: Brother International Corporation 100 Somerset Corporate Boulvard Bridgewater, NJ 08807-0911, USA TEL : (908) 704-1700 declares, that the products Product Name: Brother Mobile Inkjet Printer MP-21C/CDX, Printer Interface Card CI-100 AC Adapter AD-100MP, AD-200MP (for MP21CDX or optional PA-21MP user) complies with Part 15 of the FCC Rules.
REGULATIONS Industry Canada Compliance Statement (For Canada only) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Radio Interference (220-240 V model only) This printer complies with EN55022(CISPR Publication 22)/Class B. Before this product is used, ensure that you use a double-shielded interface cable with twisted-pair conductors and that is marked “IEEE1284 compliant”. The cable must not exceed 1.
USER’S GUIDE IMPORTANT - Wiring Information (For U.K. only) If the power cord supplied with the AC Adapter (for MP-21CDX or option) is not suitable for your electrical outlet, remove the plug from the mains cord and fit an appropriate three pin plug. If the replacement plug is intended to take a fuse then fit the same fuse as the original. If a moulded plug is severed from the power cord then it should be destroyed because a plug with cut wires is dangerous if plugged into a live socket outlet.
REGULATIONS DECLARATION OF CONFORMITY (EUROPE) We, Brother International Europe Ltd., Brother House 1 Tame Street, Guide Bridge, Audenshaw, Manchester M34 5JE, UK. declare that this product is in conformity with the following normative documents: EMC: EN 55022 Class B, EN 50082-1 following the provisions of the Electromagnetic Compatibility Directive 89/336/EEC (as amended by 91/263/EEC and 92/31/EEC) and that the AC Adapter, as supplied with this system, conforms with EN 60950.
CHAPTER 1 INTRODUCTION CHAPTER 1 INTRODUCTION ABOUT THE GUIDEBOOKS You have two guidebooks for this printer. Read each guidebook in the following order: 1. Read the Quick Setup Guide to set up your printer and connect it to your computer. It also contains information about setting up your computer for your printer by installing the printer driver. 2. Read the Users Guide to obtain information about the following.
USER’S GUIDE ABOUT YOUR PRINTER Printer Overview Top Cover PC Card Cable Printer Interface Card (CI-100) Fig. 1-1 Front View AC Adapter Connector Straight Paper Path Slot Paper Feeding Slot Guide Auto Cut Sheet Feeder -1 Parallel Interface Cable -2 Printer Stand AC Adapter -2 Fig. 1-2 Rear View Ink Cartridges (LC03BC, LC03MY) Paper Release Lever Print Head Fig.
CHAPTER 1 INTRODUCTION Features This printer has the following features: ❏ Small and Light InkJet Printer This printer weighs about 1kg (2.2 lbs.) and the footprint is very small. You can take the printer with you anywhere, any time you want. ❏ Lowest Power Consumption in the World Power consumption is so small (2.5-3.0 W: printing, 0.5 W: waiting ) that it is possible to take power from a Notebook PC through the Printer Interface Card.
USER’S GUIDE Operating and Storage Environment Please take note of the following before using the printer. Power Supply Use the printer within the specified power range. AC power: Frequency: ±10% of the rated power voltage 50/60 Hz (100-120V or 220-240 V) The power cord, including extensions, should not exceed 5 meters (16.5 feet). Do not share the same power circuit with other high-power appliances, particularly an air conditioner, copier, shredder, etc.
CHAPTER 2 PAPER HANDLING CHAPTER 2 PAPER HANDLING PAPER SPECIFICATIONS The output quality of Inkjet printers depends on the paper type being used. Before you print, be sure to check the information below. ✒ Note It is recommended that you test paper, especially special sizes and types of paper, on this printer before purchasing large quantities. The printer can handle paper that has the following specifications.
USER’S GUIDE ✒ Note To get the best output quality and to avoid any damage, use Brother special coated paper and glossy paper.
CHAPTER 2 PAPER HANDLING Printable area The Printable area depends on the settings in your application. The figure below shows the physically printable area and non guaranteed print area of various paper types with this printer. Cut Sheet 3.4mm(0.13"):A4, A5 6.4mm(0.25"):Let, Leg 3.4mm(0.13"):A4, A5 6.4mm(0.25"):Let, Leg User Defined 6.4mm(0.25") 6.4mm(0.25") 3mm(0.12") 20mm(0.78") 3mm(0.12") 20mm(0.78") 11.5mm(0.45") 11.5mm(0.45") Envelopes 3.4mm(0.13") 3.4mm(0.13") 20mm(0.78") 20mm(0.
USER’S GUIDE ABOUT BROTHER SPECIAL PAPER ! Caution When you print on coated paper, transparencies and glossy paper, be sure to select the correct media in the ‘Quality/Color’ tab in the printer driver. About Brother Special Coated Paper We recommend you use Brother special coated paper, depending on the resolution you are using, for you to get the brilliant color output you expect. For Fine quality: Quality Coated Paper for 360 dpi Color InkJet printing NO.
CHAPTER 2 PAPER HANDLING About Brother Special Glossy Paper When you print on glossy paper, you can get a very clear and crisp output. We recommend you use Brother special glossy paper for you to get the best output, as the paper is especially designed to be used for Brother Inkjet printing. For 720 dpi: Color InkJet Glossy Paper NO BPGLL BPGLA (letter) (A4) • DO NOT touch the surface of the glossy paper, as water or perspiration will stain the surface. DO NOT touch the printing side of the paper.
USER’S GUIDE LOADING PAPER How to Load Paper in the Paper Feeding Slot 1. Open the Paper Feeding Slot Guide. Fig. 2-2 Open the Paper Feeding Slot Guide 2. Make sure that the (On/Off) LED is on. Take a sheet of paper and insert it into the Paper Feeding Slot. Be sure to insert the paper to the right hand side of the Paper Feeding Slot Guide looking at the printer from the front. Fig.
CHAPTER 2 PAPER HANDLING How to Load Paper in the Straight Paper Path Slot Make sure that the (On/Off) LED is on. Take a sheet of paper and insert it into the Straight Paper Path Slot. Be sure to insert the paper to the right hand side of the Paper Feeding Slot Guide looking at the printer from the front. Be sure to adjust the paper to the mark below. 1. Fig.
USER’S GUIDE How to Load Envelopes in the Straight Paper Path Slot 1. Take an envelope and insert it into the Straight Paper Path slot. Be sure to adjust the paper to the mark below. Fig. 2-5 Loading Envelopes ✒ Note • When you load envelopes, insert the envelope carefully so that it won't skew. • Do not print on the rear of envelopes. If you do, it might damage the printer. • When loading envelopes, load them with the print side face up.
CHAPTER 2 PAPER HANDLING How to Load Paper in the Auto Cut Sheet Feeder (MP-21CDX or optional SF-21MP users only) 1. Make sure that the Latches on both sides of the Auto Cut Sheet Feeder are closed. 2. Fit the Auto Cut Sheet Feeder onto the printer. Push the latches securely until you hear them click into the lock position. Fig. 2-9 Fit the Auto Cut Sheet Feeder onto the Printer 3. Tilt the Auto Cut Sheet Feeder fully (1). Press the center of the Feeder cover a little and open the Feeder Cover(2).
USER’S GUIDE 4. Pull the wire up. Fig. 2-11 Pull the Wire up 5. Fan the stack of paper before loading. 6. Load the paper stack with the printing (coated) side upwards. Align the right side of the paper against the right hand side of the Auto Cut Sheet Feeder. Make sure that the paper is stacked below the mark. You can load up to approx. 30 sheets of plain paper (75g / m2). 7. Adjust the Paper Guide to the left hand side of the paper and close the Feeder Cover. Fig.
CHAPTER 2 PAPER HANDLING ! Caution • You can load glossy paper only from the Paper Feeding Slot or from the Straight Paper Path Slot. • When you load glossy paper, load only one sheet at a time. • Make sure the paper loaded in the Feeder is all the same type. • When adding paper, first remove any remaining paper from the Feeder and stack it with the new paper, then insert the new paper stack into the Feeder. • Be sure to adjust the paper setting in the printer driver. • Do not tilt the printer forwards.
USER’S GUIDE How to Remove the Auto Cut Sheet Feeder from the Printer 1. Open the Feeder Cover and remove the paper. 2. Move the Paper Guide to the left. 3. Fold the wire back in the Auto Cut Sheet Feeder, and close the Feeder Cover and then tilt the Feeder forwards. ! Caution Ensure you move the Paper Guide to the left, otherwise it will cause damage to the Auto Cut Sheet Feeder. 4.
CHAPTER 3 CONTROL PANEL CHAPTER 3 CONTROL PANEL LED AND BUTTONS This section refers to the following LEDs and buttons on the printer control panel. Fig. 3-1 Control Panel LEDs The (On/Off) LED The (On/Off) LED indicates the current power status of the printer. LED On ● Off ❍ Blinking ❍↔● Printer status The printer is turned on and ready to print. The printer is turned off. (Alarm) LED on. Error status with the The printer is receiving data.
USER’S GUIDE Ink LEDs ( (BC) LED and (MY) LED) Each Cartridge LED indicates when the ink is low or empty. LED Blinking ❍↔● On ● Printer status The color ink cartridge is running out of ink. You should prepare a new ink cartridge for that color. The color ink cartridge is empty. You should replace it with a new one immediately for optimum print quality. See ‘Replacing the Ink Cartridges’ section in Chapter 4.
CHAPTER 3 CONTROL PANEL Buttons The (On/Off) Button (Retry) When you press this button and the printer becomes ready to operate. When you press this button and the printer is turned off. (On/Off) LED comes on, the (On/Off) LED goes off, the (Alarm) LED is on and the (On/Off) LED is off, When the pressing this button will resume printing and the mis-feed will be cleared. Make sure that the (On/Off) LED comes on after you press this button.
CHAPTER 4 MAINTENANCE CHAPTER 4 MAINTENANCE CLEANING THE PRINT HEAD Clean the print head if you get white lines in text or graphics on your printed document. You can clean the 4 color (black, cyan, yellow, magenta) print heads by control panel button operation. ✒ Note When the printer is performing print head cleaning, all the LEDs blink alternately. How to clean the print head Press the Clean button and the printer cleans the print head automatically. Wait until all the LEDs stop blinking.
USER’S GUIDE REPLACING THE INK CARTRIDGES (BC) LED and/or (MY) LED) blink or When the Ink LED(s) ( come on, replace the indicated color ink cartridge with a new one. We strongly recommend you only use Brother original ink cartridges for the printer as these will provide the best print quality. Using other ink may void the warranty for this printer. Black & Cyan Magenta & Yellow ! LC03BC LC03MY Caution • Make sure that the (On/Off) LED is on when you replace the ink cartridges.
CHAPTER 4 MAINTENANCE ! Caution Throw away the removed ink cartridges immediately so that you do not re-install the old one by mistake. 3. Open the new ink cartridge box and take the cartridge out of the bag. ✒ Note You can recognize whether the cartridge is used or new by the white gum on the rear of the cartridge. If it is stained with ink, it is a used ink cartridge. 4. Insert the new cartridge, making sure to insert it into the correct position.
USER’S GUIDE ! Caution Once you install an ink cartridge, use it up within 6 months. Use ink cartridges within 2 years of the production date. ! Caution DO NOT remove the Ink Cartridges when the printer is off. If you have replaced ink cartridges while the printer is turned off, reset the ink counter from the maintenance tool in the printer driver. If you do not reset the counter the inside of the printer or the printouts may get stained with ink.
CHAPTER 4 MAINTENANCE CLEANING THE PRINTER Cleaning the Printer 1. Before cleaning the printer or printer platen, be sure to turn off the printer and remove the PC Card Cable from your computer and remove the AC Adapter (MP-21CDX or PA-21MP users only) if connected and make sure that all the LEDs are off. 2. Open the top cover. 3. Wipe the printer platen with a cotton swab. Fig.
USER’S GUIDE REPACKING THE PRINTER ! Caution Whenever you transport the printer, use the packing materials which are provided with your printer. Also, follow the steps below to repack the printer, or the printer may be damaged. This will void the printer’s warranty. 1. Turn off the (On/Off) button and turn the printer off. Make sure that the (On/Off) LED is off. 2. Remove the Printer Interface Card from your computer. Remove the PC Card Cable from the printer and Printer Interface Card.
CHAPTER 4 MAINTENANCE 4. Place any documents (manual and any documentation describing the reason for returning the printer) in the carton box as shown below. Fig. 4-6 Repacking the printer 5. Close the carton box and tape it securely. ! Caution • Make sure that the printer has the ink cartridges fitted to it when • shipping. Do not turn the printer upside down while shipping.
CHAPTER 5 TROUBLESHOOTING CHAPTER 5 TROUBLE SHOOTING ALARM INDICATIONS AT A GLANCE Operator Calls If a recoverable error occurs, the printer indicates an ‘operator call’ by (Alarm) LED. blinking or turning on the Find the error and take the appropriate action to correct it. The printer automatically recovers from most errors, but you may need to reset the printer with the button as described below.
USER’S GUIDE Service Calls If an unrecoverable error occurs, the printer indicates the need for a service call by lighting all the LEDs and then the following combination of lamps alternately: Service Call (On/Off) (Alarm) (BC) Service 1 ❍ ❍ ❍ Service 2 ❍ ❍ ● Service 3 ❍ ❍ ● Service 4 ❍ ● ❍ (MY) ● ❍ ● ❍ (BC) Service 5 ❍ ● ❍ Service 6 ❍ ● ● Service 7 ❍ ● ● Service 8 ● ❍ ❍ (MY) ● ❍ ● ❍ (BC) Service 9 ● ❍ ❍ Service 10 ● ❍ ● Service 11 ● ❍ ● Service 12 ● ● ❍ (MY) ● ❍ ● ❍ (BC) Ser
CHAPTER 5 TROUBLESHOOTING PAPER JAMS How to clear paper jams 1. Open the Top Cover and pull the Release Lever. Fig. 5-1 Pulling the Release Lever 2. Pull out the jammed paper carefully with the top cover open. Fig. 5-2 Pulling the Jammed Paper Out 3. Push back the Release Lever and close the Top Cover. ✒ Note • When the printer platen gets stained, clean the platen referring to the ‘Cleaning the Printer’ section in Chapter 4. • Ensure you leave the top cover open when you are removing jammed paper.
USER’S GUIDE How to clear a paper jam when using the Auto Cut Sheet Feeder (MP-21CDX or SF-21MP users only) If a paper jam occurs when you are using the Feeder, try to remove the jammed paper as shown in ‘How to clear paper jams’ section of this chapter. If you cannot remove it, even after following the instructions, do the following. 1. Open the top cover and pull the Release Lever. 2. Tilt the Auto Cut Sheet Feeder forwards. 3. Pull the jammed paper from the Feeder side. Fig.
CHAPTER 5 TROUBLESHOOTING Q&A This section contains commonly asked questions and the answers concerning your printer. If you have encountered a problem, try to find the question relating to your problem and take the steps recommended to correct the problem. Setting Up the Printer Hardware Question The printer does not work. All LEDs are off. The printer does not print. Recommendation The printer may not be turned on.
USER’S GUIDE Setting Up the Printer for Windows Question I cannot print from my application software. I cannot print the entire page. Computer indicates a device time-out. Computer indicates Paper Empty. Computer indicates Off Line. Computer indicates Power Off. Computer indicates an error message other than above. 5-6 Recommendation Make sure the supplied Windows printer driver is installed correctly and selected in your application software.
CHAPTER 5 TROUBLESHOOTING Paper Handling Question The printer does not load paper. How can I load envelopes? What paper can I use? How can I clear paper jams? The printer loads more than one sheet at a time when using the Auto Cut Sheet Feeder (MP-21CDX or optional SF21MP users only). The printer doesn’t eject paper. Paper loads skewed when using the Auto Cut Sheet Feeder (MP-21CDX or optional SF-21MP users only). Mis-picking up paper when using the Feeder.
USER’S GUIDE Printing Question The printer prints unexpectedly or it prints incorrect images. The computer hangs up when the printer starts printing, or an application error occurs. My headers or footers appear when I view my document on screen but do not show up when I print them. Printing takes too long. The printer doesn’t print in color. The printer will not turn on again or is unable to print after the PC goes into sleep mode (Suspend or Hibernation) when using Windows 3.1x.
CHAPTER 5 TROUBLESHOOTING Print Quality ✒ Note You can clear a print quality problem by replacing an ink cartridge with a (BC) LED or (MY) LED) is on or new one if the Ink LED ( blinking. Question Printed pages contain white horizontal lines or the image is faint. ABCDE Fig. 5-4 White Horizontal Lines or Faint Images Nothing is printed on the page. Fig. 5-5 White Page The colors of your print output are not what you expected. Vertical lines are not aligned or the outline of characters is faint.
USER’S GUIDE Question Colors are light. Some colors are missing. Printed paper is damaged by excessive ink. Printout is fuzzy. The space between lines of text is narrower than you have set. Black lines appears. Banding appears. Recommendation You may have printed in Draft mode. Set to Normal mode or Super Fine mode in the printer driver. • Clean the print head several times. • Ink may have run out. Check to see if you have run out of certain ink colors. Check if the printer driver settings are correct.
CHAPTER 5 TROUBLESHOOTING ! Caution Operation of the printer outside the specifications shall be deemed abuse and all repairs thereafter shall be the sole liability of the end user /purchaser. (For USA & CANADA Only) For technical and operational assistance, please call: In USA In CANADA 1-877-284-3238 949-859-9700 Ext.
APPENDIX APPENDIX PRINTER SPECIFICATIONS Printing Print Method Piezo with 32 X 4 nozzles Resolution 720 X 720 dots per inch (DPI) - Super Fine 360 X 360 dots per inch (DPI) - Normal 180 X 360 dots per inch (DPI) - Draft Print Speed (with Printer Interface Card) 107 cps at 10 cpi Up to 1.7 PPM in full color (Brother Standard Test Sheet) (with AC Adapter) 180 cps at 10 cpi Up to 2.5(Letter)/2.
USER’S GUIDE Electrical and Mechanical Power Source Power Save Mode: 0.6 W Stand-by: 1.0 W Printing-average: 2.5 W or less Power Save Mode: 0.7 W Stand-by: 1.1 W Printing-average: 3.2 W or less Noise Printing: 40 dB A or less Temperature Operating: 10 to 35°C (50 to 95°F ) Storage: -20 to 60°C (-4 to 140°F ) Humidity Operating: 20 to 80% (without condensation) Storage: 5 to 95% (without condensation) Dimensions (D X W X H) 50.8 X 300 X 106 mm (2.
APPENDIX Paper Output 1 sheet, face up It is recommended that printed sheets are taken from the paper output slot immediately after printing. Ink Twin cartridge system: separate from the print head Service Life of Ink Cartridge Approx. 250 page / LC03BC at 5% coverage Approx.
INDEX INDEX —A— (Alarm) LED Auto Cut Sheet Feeder —M— 3-2, 5-1 2-9 misfeed (MY) LED —B— (BC) LED 3-3 4-1 2-1 2-2, 2-5 5-1 2-1 —E— 2-1, 2-8 5-1 5-2 —F— Feeder Capacity 2-1 2-1 —H— High Quality Coated Paper for 720 dpi Color InkJet printing (On/Off) Button (On/Off)LED operator call Organizer 3-3 3-1 5-1 2-1 —P— Paper Size Type Paper empty Paper Feeding Slot Paper Feeding Slot Guide paper guide Paper jam Paper Weight Range printable area 2-1 2-1 5-1 2-6 2-6 2-10 5-1, 5-3 2-1 2-3 Quality Coated
USER’S GUIDE —W— —T— Transparencies Index-2 Windows 2-1 5-6
