Owner's Manual

To use the [Scan Settings] option, you must connect a computer with Brother iPrint&Scan installed to
the machine.
8. Press a or b to select the [Set at Device] option, and then press OK.
9. Select the scan settings you want to change, and then press OK.
Option Description
Color Setting
Select the scan color format of your document.
Resolution
Select the scan resolution for your document.
File Type
Select the file format for your document.
Document Size
Select your document size.
Brightness
Select the brightness level.
Contrast
Select the contrast level.
Auto Deskew
Correct any skewed documents when they are scanned.
Skip Blank Page
When On is selected, blank pages are skipped.
Remove Background
Change the amount of background color that is removed.
10. Press Black Start or Color Start.
[Color Setting] depends on the settings you have selected. Pressing Black Start or Color Start does
not allow you to change the settings.
MFC-J1170DW
1. Load your document.
2. Press [Scan] > [to PC] > [to E-mail].
3. If the machine is connected over the network, press a or b to display the computer where you want to send
data, and then select the computer name.
If the LCD message prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer,
and then press [OK].
4. Do one of the following:
• To change the settings, press
[Options].
• Press [Start] to start scanning without changing additional settings.
The machine scans the document and saves it as a file attachment. It then launches your email
application and opens a new, blank email message with the scanned file attached.
To use [Options], you must connect a computer with Brother iPrint&Scan installed to the machine.
5. Press [Scan Settings] > [Set at Device].
6. Select the scan settings you want to change, and then press [OK].
Option Description
Color Setting
Select the color format for your document.
Resolution
Select the scan resolution for your document.
File Type
Select the file format for your document.
101