Laser Multifunction Printer Owner's Manual

33
SETTING UP THE MACHINE AND COMPUTER TO WORK TOGETHER
If you are using Windows
®
95, after you connect Brother machine to
Computer. you may see “New Hardware Found Brother MFC-9750”
during startup.
You can select “Do not install a driver (Windows
®
will not prompt you
again).” and click OK, so Windows
®
will not display this dialog box
again
—OR—
If you see “Update Device Driver Wizard”, Click Next to bypass the
Windows
®
Plug and Play Printer Driver screens, followed by Finish.
If you are using Windows
®
98, you may see the “Add New Hardware
Wizard” during startup, follow the instructions from the installer, then
click Next. Click Finish when it appears on the screen.
Installing MFC-9750 Printer Driver
If you are using Windows NT
®
Workstation Version 4.0:
1
Insert the CD-ROM for the MFC-9750 printer driver into your CD-
ROM Drive.
2
Click the Start button in the Task bar.
3
Select Run.
4
Enter X:\winnt\setup (where X is your CD-ROM Drive).