User Manual
Table Of Contents
- Quick Setup Guide MFC-J6910DW
- Start Here
- 1 Unpack the machine and check the components
- 2 Load plain A4 paper
- 3 Connect the power cord and telephone line
- 4 Set your country (Australia and New Zealand only)
- 5 Install the ink cartridges
- 6 Check the print quality
- 7 Set the paper settings
- 8 Choose your language (if needed) (Not available in Australia and New Zealand)
- 9 Choose a Receive Mode
- 10 Set the date and time
- 11 Enter personal information (Station ID)
- 12 Fax Transmission Report
- 13 Set Tone or Pulse dialling mode (Not available in New Zealand)
- 14 Set the telephone line compatibility
- 15 Manual Feed Slot
- 16 Choose your connection type
- For USB interface users (Windows® 2000 Professional/XP Home/XP Professional/Windows Vista®/Windows® 7)
- For USB interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- For wired network interface users (Windows® 2000 Professional/XP Home/XP Professional/Windows Vista®/Windows® 7)
- For wired network interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- For wireless network interface users
- 17 Before you begin
- 18 Confirm your network environment (Infrastructure Mode)
- 19 Configure the wireless settings (typical Wireless Setup in infrastructure mode)
- 19 Configure the wireless settings using the automatic wireless (one-push) method
- Troubleshooting
- Install the drivers & software (Windows® 2000 Professional/XP Home/XP Professional/Windows Vista®/Windows® 7)
- Install the drivers & software (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- Install Optional Applications Windows®
- For Network Users
- Consumables
- brohter ARL/ASA/NZ
- Start Here
8
7
Set the paper settings
For your machine to produce the best print quality and
feed the correct paper size, the paper type and size
must be set to match the paper in the tray.
For details on the types and sizes of paper supported,
see Paper Size and Type in chapter 2 of the Basic
User’s Guide.
a When the LCD shows to set the paper size and
paper type, press Tray Setting.
b Press Tray#1 or Tray#2 for paper size, or the
button below Tray#1 for paper type of Tray#1.
c Press the type or size of paper you are using.
d Press Stop/Exit.
8
Choose your language
(if needed) (Not available
in Australia and New
Zealand)
a Press MENU.
b Press a or b to choose Initial Setup.
c Press Initial Setup.
d Press a or b to choose Local Language.
e Press Local Language.
f Press your language.
g Press Stop/Exit.
9
Choose a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
For details, see Using Receive Modes in chapter 5 of
the Basic User’s Guide.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press Receive Mode.
e Press Fax Only, Fax/Tel, External TAD
or Manual.
f Press Stop/Exit.
Note
You can change the default tray the machine will
use for printing copies or received faxes. (See
Tray use in Copy mode or Tray use in Fax mode
in chapter 2 of the Basic User’s Guide.)
Note
To cancel, press Stop/Exit. You can set the
paper settings later.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Your machine
automatically answers
every call as a fax.
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the telephone
will ring for you to pick
up the call.
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
printed.
You control the
telephone line and must
answer every call
yourself.
Do you want the machine to
answer fax and telephone calls
automatically?
Manual
Fax Only
Fax/Tel
External TAD
No
Yes
Yes
No
No
Yes
Are you using the voice message
function of an external telephone
answering device?










