Software User's Guide

Network Scanning
207
13
d The Host Address is the domain name of the FTP server. Enter the Host Address (for example
ftp.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).
e Enter the Username that has been registered with the FTP server for the machine (up to 32 characters).
f Enter the Password for access to the FTP server (up to 32 characters).
g Enter the destination folder where your document will be stored on the FTP server (for example
\brother\abc) (up to 60 characters).
h Choose the file name you want to use for the scanned document. You can choose from seven preset
and two user defined file names. The file name that will be used for your document will be the file name
you selected plus the last 6 digits of the flatbed/ADF scanner counter plus the file extension (For
example, Estimate_098765.pdf). You can also manually enter a file name up to 15 characters.
i Choose the scan quality from the drop-down list. You can choose Color 100 dpi, Color 200 dpi,
Color 300 dpi, Color 600 dpi, B/W 100 dpi, B/W 200 dpi or B/W 300 dpi.
j Choose the file type for the document from the drop-down list. You can choose PDF or JPEG for color
documents, PDF or TIFF for B/W documents.
k Choose the glass scan size from the drop-down list. You can choose Letter, Legal, Ledger, A4 or A3.
Scan to FTP using FTP Server Profiles 13
a Load your document.
b Press the (SCAN) key.
c Press a or b to choose Scan to FTP.
Press OK.
d Press a or b to choose one of the FTP server profiles listed.
Press OK.
 If the Scan to FTP profile is complete, you will automatically go to k.
 If the Scan to FTP profile is not complete, for instance, the login account name and password are
missing or the quality or file type are not chosen, you will be prompted to enter any missing information
in the following steps.
e Choose one of the options below:
 Press a or b to choose Color 100, Color 200, Color 300 or Color 600. Press OK and go to
f.
 Press a or b to choose B/W 100, B/ W 200 or B/W 300. Press OK and go to g.