Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network
- Overview
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using the WPS/AOSS™ control panel menu (Infrastructure mode only) (Recommended)
- Configuration using the machine’s control panel Setup Wizard to configure your wireless network machine
- Configuration using the Brother installer application on the installation CD-ROM to configure your wireless network machine
- Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only)
- Configuring your machine for a wireless network (for Infrastructure mode and Ad-hoc mode)
- Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network
- Using the Setup Wizard from the control panel
- Configuring your machine when the SSID is not broadcast
- Using the Brother automatic installer application on the installation CD-ROM to configure your machine for a wireless network
- Using the PIN Method of Wi-Fi Protected Setup
- 4 Wireless configuration using the Brother installer application
- 5 Control panel setup
- Network menu
- Restoring the network settings to factory default
- Printing the Network Configuration List
- Printing the WLAN Report
- Function table and default factory settings
- 6 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Secure Function Lock 2.0
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser
- Changing the LDAP configuration using a web browser (MFC-J6910DW only)
- 7 LDAP operation (MFC-J6910DW only)
- 8 Internet fax
- 9 Security features
- 10 Troubleshooting
- Appendix A
- Index
LDAP operation (MFC-J6910DW only)
52
7
e Press the name you are looking for.
Note
To confirm details of the result information, press the name you are looking for, and then press
.
f Choose either a fax number or an E-mail address.
g Load your document and press Send a fax.
Note
• The LDAP function of this machine supports LDAPv3.
• You need to use Simple Authentication to communicate with your LDAP server.
• SSL/TLS is not supported.
• For more information, visit the solutions section for your model page at http://solutions.brother.com/
.
Changing the LDAP configuration using BRAdmin Professional
(For Windows
®
) 7
Note
Please use the latest version of the BRAdmin Professional utility that is available as a download from
http://solutions.brother.com/
. This utility is only available for Windows
®
users.
a Start the BRAdmin Professional utility, by clicking start / All Programs
1
/
Brother Administrator Utilities / Brother BRAdmin Professional 3 / BRAdmin Professional 3.
1
Programs for Windows
®
2000 users
b Choose the print server which you want to configure.
c Choose Configure Device from the Control menu.
d Enter a password. The default password is "access".
Detail