Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network
- Overview
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using the WPS/AOSS™ control panel menu (Infrastructure mode only) (Recommended)
- Configuration using the machine’s control panel Setup Wizard to configure your wireless network machine
- Configuration using the Brother installer application on the installation CD-ROM to configure your wireless network machine
- Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only)
- Configuring your machine for a wireless network (for Infrastructure mode and Ad-hoc mode)
- Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network
- Using the Setup Wizard from the control panel
- Configuring your machine when the SSID is not broadcast
- Using the Brother automatic installer application on the installation CD-ROM to configure your machine for a wireless network
- Using the PIN Method of Wi-Fi Protected Setup
- 4 Wireless configuration using the Brother installer application
- 5 Control panel setup
- Network menu
- Restoring the network settings to factory default
- Printing the Network Configuration List
- Printing the WLAN Report
- Function table and default factory settings
- 6 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Secure Function Lock 2.0
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser
- Changing the LDAP configuration using a web browser (MFC-J6910DW only)
- 7 LDAP operation (MFC-J6910DW only)
- 8 Internet fax
- 9 Security features
- 10 Troubleshooting
- Appendix A
- Index
Control panel setup
41
5
The factory settings are shown in bold.
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to values appropriate for your network.
2
Available after IFAX is downloaded.
3
For Touchscreen models, this menu is available when Auto Polling is set to On.
4
For Touchscreen models, you can choose the interval from 1 Min/3 Mins/5 Mins/10 Mins/30 Mins/60 Mins.
5
The LDAP protocol is not supported for China.
Network
(Continued)
E-mail/IFAX
2
(Continued)
Setup Server
(Continued)
Mailbox Name —
Mailbox Pwd —
APOP On/Off
Setup Mail
RX
Auto Polling On/Off
Poll Frequency
3
10Min(s)
(01Min(s) to 60Min(s))
4
Header All/Subject+From+To/None
Del Error Mail On/Off
Notification On/MDN/Off
Setup Mail
TX
Sender Subject —
Size Limit On/Off
Notification On/Off
Setup Relay
Rly Broadcast On/Off
Relay Domain Relayxx
Relay Report On/Off
Time Zone UTCxxx:xx
Network I/F Wired LAN/WLAN
LDAP
5
(MFC-J6910DW
only)
On/Off
Network Reset
Main menu Submenu Menu Selections Options