Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network
- Overview
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using the WPS/AOSS™ control panel menu (Infrastructure mode only) (Recommended)
- Configuration using the machine’s control panel Setup Wizard to configure your wireless network machine
- Configuration using the Brother installer application on the installation CD-ROM to configure your wireless network machine
- Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only)
- Configuring your machine for a wireless network (for Infrastructure mode and Ad-hoc mode)
- Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network
- Using the Setup Wizard from the control panel
- Configuring your machine when the SSID is not broadcast
- Using the Brother automatic installer application on the installation CD-ROM to configure your machine for a wireless network
- Using the PIN Method of Wi-Fi Protected Setup
- 4 Wireless configuration using the Brother installer application
- 5 Control panel setup
- Network menu
- Restoring the network settings to factory default
- Printing the Network Configuration List
- Printing the WLAN Report
- Function table and default factory settings
- 6 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Secure Function Lock 2.0
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser
- Changing the LDAP configuration using a web browser (MFC-J6910DW only)
- 7 LDAP operation (MFC-J6910DW only)
- 8 Internet fax
- 9 Security features
- 10 Troubleshooting
- Appendix A
- Index
Control panel setup
39
5
Function table and default factory settings 5
Main menu Submenu Menu Selections Options
Network Wired LAN TCP/IP BOOT Method Auto/Static/RARP/BOOTP/DHCP
IP Address [000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
1
Subnet Mask [000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
1
Gateway [000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
Node Name BRNXXXXXXXXXXXX= (your machine’s
Ethernet address)
(up to 15 characters)
WINS Config Auto/Static
WINS Server Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
DNS Server Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
APIPA On/Off
IPv6 On/Off
Ethernet Auto/100B-FD/100B-HD/10B-FD/10B-HD
MAC Address
WLAN TCP/IP BOOT Method Auto/Static/RARP/BOOTP/DHCP
IP Address [000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
1
Subnet Mask [000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
1
Gateway [000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]










