Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network
- Overview
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using the WPS/AOSS™ control panel menu (Infrastructure mode only) (Recommended)
- Configuration using the machine’s control panel Setup Wizard to configure your wireless network machine
- Configuration using the Brother installer application on the installation CD-ROM to configure your wireless network machine
- Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only)
- Configuring your machine for a wireless network (for Infrastructure mode and Ad-hoc mode)
- Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network
- Using the Setup Wizard from the control panel
- Configuring your machine when the SSID is not broadcast
- Using the Brother automatic installer application on the installation CD-ROM to configure your machine for a wireless network
- Using the PIN Method of Wi-Fi Protected Setup
- 4 Wireless configuration using the Brother installer application
- 5 Control panel setup
- Network menu
- Restoring the network settings to factory default
- Printing the Network Configuration List
- Printing the WLAN Report
- Function table and default factory settings
- 6 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Secure Function Lock 2.0
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser
- Changing the LDAP configuration using a web browser (MFC-J6910DW only)
- 7 LDAP operation (MFC-J6910DW only)
- 8 Internet fax
- 9 Security features
- 10 Troubleshooting
- Appendix A
- Index
ii
Table of Contents
1 Introduction 1
Network features........................................................................................................................................1
Other Network features .......................................................................................................................3
2 Changing your machine’s network settings 4
How to change your machine’s network settings (IP address, Subnet mask and Gateway).....................4
Using the control panel........................................................................................................................4
Using BRAdmin Light utility .................................................................................................................4
Other Management Utilities .......................................................................................................................7
Web Based Management (web browser) ............................................................................................7
BRAdmin Professional 3 utility (Windows
®
) ........................................................................................7
Web BRAdmin (Windows
®
).................................................................................................................7
3 Configuring your machine for a wireless network 8
Overview....................................................................................................................................................8
Step by step chart for wireless network configuration ...............................................................................9
For Infrastructure mode.......................................................................................................................9
For Ad-hoc mode...............................................................................................................................10
Confirm your network environment..........................................................................................................11
Connected to a computer with a WLAN access point/router in the network
(Infrastructure mode) .....................................................................................................................11
Connected to a wireless capable computer without a WLAN access point/router in the network
(Ad-hoc mode)...............................................................................................................................11
Confirm your wireless network setup method..........................................................................................12
Configuration using the WPS/AOSS™ control panel menu (Infrastructure mode only)
(Recommended)............................................................................................................................12
Configuration using the machine’s control panel Setup Wizard to configure your wireless network
machine.........................................................................................................................................12
Configuration using the Brother installer application on the installation CD-ROM to configure your
wireless network machine .............................................................................................................13
Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only) ...............14
Configuring your machine for a wireless network (for Infrastructure mode and Ad-hoc mode)...............15
Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless
network..........................................................................................................................................15
Using the Setup Wizard from the control panel .................................................................................15
Configuring your machine when the SSID is not broadcast ..............................................................16
Using the Brother automatic installer application on the installation CD-ROM to configure your
machine for a wireless network .....................................................................................................20
Using the PIN Method of Wi-Fi Protected Setup ...............................................................................20
4 Wireless configuration using the Brother installer application 24
Before configuring the wireless settings ..................................................................................................24
Configure the wireless settings................................................................................................................25