User Manual

Table Of Contents
Network Scanning
200
13
Using the Scan key on your network 13
Note
If you are connected using USB, see USB cable scanning on page 182.
Scan to E-mail (PC) 13
When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the computer you
designated on your network. The ControlCenter software will launch the default E-mail application on the
designated computer. You can scan and send a black and white or colour document from the computer as
an E-mail attachment.
a Load your document.
b Press (SCAN).
c Press a or b to choose Scan to E-mail.
Press OK.
d Press a or b to choose PC.
Press OK.
e Press a or b to choose the destination computer you want to use for E-mailing your document.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer
on the control panel.
Press OK.
f Press Mono Start or Colour Start.
The machine starts the scanning process.
For Touchscreen models
13
a Load your document.
b Press the (SCAN) key.
c Press d or c to choose to Email.
d Press PC.
e Press a or b to display the destination PC you want to use for E-mailing your document.