User Manual

USB cable scanning
192
12
g Press d or c to choose Glass Scan Size and then the glass scan size you want.
 If you want to change the file type, go to h.
 If you want to start scanning without changing any settings, go to i.
h Press d or c to choose File Type and then the file type you want.
Note
• If you choose color in the quality setting, you cannot choose TIFF.
• If you choose black and white in the quality setting, you cannot choose JPEG.
i Press Mono Start or Colour Start to start scanning. If you are using the scanner glass, the LCD displays
Next Page?. Press Yes or No. After you finish scanning, make sure you choose No before removing
the USB Flash memory drive or memory card from the machine.
Note
Scan type depends on the settings you choose in step f to h, Mono Start or Colour Start does not
change the setting.
How to set a new default for Scan to Media 12
You can set your own default settings.
Setting the new default 12
a Press (SCAN).
b Press a or b to choose Scan to Media.
Press OK.
c Press and choose your new setting. Repeat this step for each setting you want to change.
d After changing the last setting, press a or b to choose Set New Default.
Press OK.
e Press 1 to choose Yes.
f Press Stop/Exit.