User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- Windows®
- 1 Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Print Profiles tab
- Support
- Using FaceFilter Studio for photo printing by REALLUSION
- 2 Scanning
- 3 ControlCenter4
- 4 Remote Setup
- 5 Brother PC-FAX Software
- 6 PhotoCapture Center™
- 7 Firewall settings (For Network users)
- 1 Printing
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center™
- Using the Scan key
- Index
- brother CHN-ENG
Network Scanning
199
13
e Press the destination PC and then press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on
the control panel.
Press OK.
Do one of the following:
If you want to use duplex scanning, go to f.
If you do not want to use duplex scanning, go to g.
f Press Duplex Scan.
Press DuplexScan :LongEdge or DuplexScan :ShortEdge.
g Press Mono Start or Colour Start.
The machine starts the scanning process.
Note
(Windows
®
) 13
Scan type depends on the settings of the Device Scan Settings screen of ControlCenter4.
Mono Start or Colour Start does not change the settings.
If you want to change between colour and black and white scanning, click Help in ControlCenter4.
Presto! PageManager must be installed on your PC.
(Macintosh)
13
Scan type depends on the settings of the Device Button tab of ControlCenter2. Mono Start or
Colour Start does not change the settings.
You must download Presto! PageManager and install it on your Macintosh for the OCR feature to work
from the SCAN key or ControlCenter2. For installation information see Using Presto! PageManager
on page 151.