User Manual

USB cable scanning
188
12
Factory reset 12
a Press (SCAN).
b Press a or b to choose Scan to Media.
Press OK.
c Press a or b to choose Factory Reset.
Press OK.
d Press 1 to choose Yes.
e Press Stop/Exit.
Setting the new default (For Touchscreen models)
12
a Press (SCAN).
b Press d or c to choose to Media.
c Press and choose your new setting. Repeat this step for each setting you want to change.
d After changing the last setting, press d or c to choose Set New Default.
e Press Yes.
f Press Stop/Exit.
Factory reset (For Touchscreen models)
12
a Press (SCAN).
b Press d or c to choose to Media.
c Press d or c to choose Factory Reset.
d Press Yes.
e Press Stop/Exit.