User Manual

PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
59
8
PhotoCapture Center™
print settings
8
You can change the print settings for the next
printing.
These settings are temporary, and the
machine returns to its default settings
3 minutes after printing, unless you have set
the Mode Timer to 2 minutes or less. (See
Mode Timer on page 5.)
Note
You can save the print settings you use
most often by setting them as the default.
(See Setting your changes as the new
default on page 62.)
Print Quality 8
a Press Print Setting.
b Press a or b to display
Print Quality.
c Press Print Quality.
d Press Normal or Photo.
e If you do not want to change additional
settings, press .
Press Color Start to print.
Paper options 8
Paper Type 8
a Press Print Setting.
b Press a or b to display Paper Type.
c Press Paper Type.
d Press the paper type you are using,
Plain Paper, Inkjet Paper,
Brother BP71, Brother BP61 or
Other Glossy.
e If you do not want to change additional
settings, press .
Press Color Start to print.
Paper and print size 8
a Press Print Setting.
b Press a or b to display Paper Size.
c Press Paper Size.
d Press the paper size you are using,
4"x 6", 5"x 7", Letter, Ledger, A4
or A3.
Do one of the following:
 If you chose Letter or A4, go to
step e.
 If you chose another size of paper,
go to step f.