User Manual

Chapter 1
2
LCD display
1
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after the last key press.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display LCD Settings.
e Press LCD Settings.
f Press Dim Timer.
g Press 10 Secs, 20 Secs, 30 Secs or
Off.
h Press Stop/Exit.
Dial Prefix
1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example, if your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
Setting up or changing the
prefix number 1
a Press MENU.
b Press a or b to display
Initial Setup.
c Press Initial Setup.
d Press a or b to display Dial Prefix.
e Press Dial Prefix.
f Press On (or Off).
g Press Dial Prefix.
h Enter the prefix number (up to 5 digits)
by pressing the buttons on the
Touchscreen.
i Press OK.
Note
• If your telephone system requires a timed
break recall (hookflash), press Hook to
enter the break.
• You cannot use ! with any other numbers
or characters.
• If the pulse dialing mode is on, # and l are
not available to use.
j Press Stop/Exit.