User Manual

General setup
3
1
Dial Prefix 1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example, if your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
Setting up or changing the
prefix number 1
a Press MENU.
b Press a or b to display
Initial Setup.
c Press Initial Setup.
d Press a or b to display Dial Prefix.
e Press Dial Prefix.
f Press On (or Off).
g Press Dial Prefix.
h Enter the prefix number (up to 5 digits)
by pressing the buttons on the
Touchscreen.
i Press OK.
Note
• If your telephone system requires a timed
break recall (hookflash), press Hook to
enter the break.
• You cannot use ! with any other numbers
or characters.
• (Not available in New Zealand) If the pulse
dialing mode is on, # and l are not
available to use.
j Press Stop/Exit.
Mode Timer 1
The machine has four temporary mode keys
on the control panel: FAX, SCAN, COPY and
PHOTO CAPTURE. You can change the
amount of time the machine takes after the
last Scan, Copy or PhotoCapture operation
before it returns to Fax mode. If you choose
Off, the machine stays in the mode you used
last by default.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Mode Timer.
e Press Mode Timer.
f Press 0 Sec, 30 Secs, 1 Min,
2 Mins, 5 Mins or Off.
g Press Stop/Exit.