User Manual
Table Of Contents
- ADVANCED USER’S GUIDE MFC-J6910DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General setup
- 2 Security features
- 3 Sending a fax
- Additional sending options
- Additional sending operations
- Sending a duplex (2-sided) fax from the ADF
- Sending a fax manually
- Sending a fax at the end of a conversation
- Dual Access (Monochrome only)
- Broadcasting (Monochrome only)
- Real Time Transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Polling overview
- 4 Receiving a fax
- 5 Dialling and storing numbers
- 6 Printing reports
- 7 Making copies
- Copy settings
- 8 Printing photos from a memory card or USB Flash memory drive
- 9 Printing photos from a camera
- A Routine maintenance
- B Glossary
- Index
- brother ARL/ASA/NZ
1
1
1
Memory storage 1
Even if there is a power failure, you will not
lose the settings you have chosen using the
MENU button because they are stored
permanently. Also, you will not lose your
settings in the FAX, SCAN, COPY and
PHOTO CAPTURE mode key menus if you
have chosen Set New Default or
Favorite Settings. You may have to
reset the date and time.
Note
During a power failure the machine will
retain messages that are in the memory
for approximately 24 hours.
Setting Daylight
Saving Time
1
You can set the machine to change for
daylight saving time. It will reset itself forward
one hour in the Spring and backward one
hour in the Autumn. Make sure you have set
the correct date and time in the Date&Time
setting.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display
Daylight Save.
e Press Daylight Save.
f Press Off (or On).
g Press Stop/Exit.
General setup 1