User Manual
Table Of Contents
- ADVANCED USER’S GUIDE MFC-J6910DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General setup
- 2 Security features
- 3 Sending a fax
- Additional sending options
- Additional sending operations
- Sending a duplex (2-sided) fax from the ADF
- Sending a fax manually
- Sending a fax at the end of a conversation
- Dual Access (Monochrome only)
- Broadcasting (Monochrome only)
- Real Time Transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Polling overview
- 4 Receiving a fax
- 5 Dialling and storing numbers
- 6 Printing reports
- 7 Making copies
- Copy settings
- 8 Printing photos from a memory card or USB Flash memory drive
- 9 Printing photos from a camera
- A Routine maintenance
- B Glossary
- Index
- brother ARL/ASA/NZ
Routine maintenance
61
A
b Wipe the outside of the machine with a
dry, soft lint-free cloth to remove dust.
c Lift the output paper tray cover and
remove anything that is stuck inside the
paper tray.
d Wipe the paper tray with a dry, soft
lint-free cloth to remove dust.
e Close the output paper tray cover and
put the output paper tray firmly back in
the machine.
Cleaning the machine’s
printer platen A
CAUTION
Be sure to unplug the machine from the
electrical socket before cleaning the printer
platen.
a Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover into the open position.
b Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a dry, soft lint-free
cloth.
IMPORTANT
DO NOT touch the plate (2) and lever (3).
Doing this may cause damage to the
machine.
13
2










