User Manual

Chapter 8
54
Borderless printing 8
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a Press Print Setting.
b Press a or b to display Borderless.
c Press Borderless.
d Press Off (or On).
e If you do not want to change additional
settings, press .
Press Colour Start to print.
Date Print 8
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn’t
have the date information, you cannot use
this function.
a Press Print Setting.
b Press a or b to display Date Print.
c Press Date Print.
d Press
On
(or
Off
).
e If you do not want to change additional
settings, press .
Press Colour Start to print.
Note
The DPOF setting on your camera must
be turned off to use the Date Print
feature.
Setting your changes as a
new default 8
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a Press your new setting.
Repeat this step for each setting you
want to change.
b After changing the last setting, press
a or b to choose Set New Default.
c Press Set New Default.
d Press Yes to confirm.
e Press Stop/Exit.
Restoring all settings to the
factory settings 8
You can restore the PhotoCapture settings
Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
Color Enhance, Cropping, Borderless
and Date Print, that you have changed, to
the factory settings.
a Press Print Setting.
b Press a or b to display
Factory Reset.
c Press Factory Reset.
d Press Yes to confirm.
e Press Stop/Exit.