User Manual

Making copies
43
7
g Press Fit to Page or Keep Scale.
Note
If you choose Fit to Page, your
machine will reduce the document size
automatically to fit the printable area.
If you choose Keep Scale, your
machine will not change the document
size. The top and bottom might be cut off
depending on the document size.
h Press d or c to display the duplex copy
type you want, and press it. (See Duplex
copying type on page 44.)
i Enter the number of copies you want.
Note
If you want to sort multiple copies,
press d or c to display Stack/Sort, then
press Sort.
j Press Mono Start or Colour Start.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go to
step k.
k Press Scan and place the next page on
the scanner glass. Press Mono Start or
Colour Start. The machine starts
printing.
l If you pressed Sort for multiple copies,
repeat step k for each additional page.
After all the pages have been scanned,
press Complete.
The machine starts printing.
DO NOT touch printed pages until they are
ejected the second time. The machine will
print and eject the first side, and then pull the
paper back in to print the second side.
Note
• If your document causes paper jams, try
using one of the special duplex copy
settings. Press More after step c. Press
Advanced, and then press one of the jam
prevention settings: DX1 or DX2.
DX1 helps avoid paper jams when copying
by allowing more time for the ink to dry.
DX2 allows more time for the ink to dry
while also using less ink.
• DX1 is not available for A3 or Ledger size
paper.
• 2 in 1 (ID), Poster and Book Copy
are not available with Duplex Copy.
• 1to2 and Skew Adjustment are not
available with 2sidei2side and
2sidei1side.
• When using A3 or Ledger size paper,
Enlarge/Reduce is not available with
1sidei2side and 2sidei2side.
• Fit to Page is not available with
1sidei2side and 2sidei2side.