User Manual
Table Of Contents
- ADVANCED USER’S GUIDE MFC-J6910DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General setup
- 2 Security features
- 3 Sending a fax
- Additional sending options
- Additional sending operations
- Sending a duplex (2-sided) fax from the ADF
- Sending a fax manually
- Sending a fax at the end of a conversation
- Dual Access (Monochrome only)
- Broadcasting (Monochrome only)
- Real Time Transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Polling overview
- 4 Receiving a fax
- 5 Dialling and storing numbers
- 6 Printing reports
- 7 Making copies
- Copy settings
- 8 Printing photos from a memory card or USB Flash memory drive
- 9 Printing photos from a camera
- A Routine maintenance
- B Glossary
- Index
- brother ARL/ASA/NZ
Making copies
41
7
Book Copy 7
Book copy corrects dark borders and skew
when copying from the scanner glass. Your
machine can correct the data automatically or
you can make specific corrections.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press d or c to display
Advanced Settings.
e Press Advanced Settings.
f Press Book Copy.
g If you have finished making corrections,
press Mono Start or Colour Start.
Note
Page Layout, Sort, Duplex Copy,
Skew Adjustment, Ink Save Mode,
Fit to Page, Thin Paper Copy and
Watermark Copy are not available with
Book Copy.
Watermark Copy 7
You can place a logo or text into your
document as a Watermark. You can select
one of the template watermarks, data from
your media cards or USB Flash memory
drive, or scanned data.
Note
Fit to Page, Page Layout,
Thin Paper Copy,
Skew Adjustment, Ink Save Mode
and Book Copy are not available with
Watermark Copy.
Using a template 7
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press d or c to display
Advanced Settings.
e Press Advanced Settings.
f Press Watermark Copy.
g Press Edit Template.
h Change the settings from the options
displayed on the LCD if required.
i Press OK to confirm to use watermark.
j If you do not want to change additional
settings, press Mono Start or
Colour Start.
Using a media cards or USB Flash
memory drive data
7
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press d or c to display
Advanced Settings.
e Press Advanced Settings.
f Press Watermark Copy.
g Press Use Image.
h Insert a media card or USB Flash
memory drive. Press Media.
i Press the data you want to use for the
watermark.










