User Manual

Making copies
35
7
Enlarging or reducing the
copied image 7
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press d or c to display
Enlarge/Reduce.
e Press Enlarge/Reduce.
f Press 100%, Enlarge, Reduce,
Fit to Page or Custom(25-400%).
g Do one of the following:
 If you chose Enlarge or Reduce,
press the enlargement or reduction
ratio you want.
 If you chose Custom(25-400%),
enter an enlargement or reduction
ratio from 25% to 400%.
Press OK.
 If you chose 100% or Fit to Page,
go to step h.
h If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
• Page Layout is not available with
Enlarge/Reduce.
• Page Layout, Book Copy, Sort,
Thin Paper Copy and
Watermark Copy are not available with
Fit to Page.
• Fit to Page does not work correctly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper left
hand corner, with the document face down
on the scanner glass.
• Fit to Page is not available for a Legal
size document.
• When using A3 or Ledger size paper,
1sidei2side and 2sidei2side of
Duplex Copy is not available with
Enlarge/Reduce.
198% 10x15cmiA4
186% 10x15cmiLTR
141% A4iA3, A 5iA4
100%
97% LTRiA4
93% A4iLTR
83% LGLiA4
69% A3iA4, A4iA5
47% A4i10x15cm
Fit to Page
Custom(25-400%)