User Manual
Table Of Contents
- ADVANCED USER’S GUIDE MFC-J6910DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General setup
- 2 Security features
- 3 Sending a fax
- Additional sending options
- Additional sending operations
- Sending a duplex (2-sided) fax from the ADF
- Sending a fax manually
- Sending a fax at the end of a conversation
- Dual Access (Monochrome only)
- Broadcasting (Monochrome only)
- Real Time Transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Polling overview
- 4 Receiving a fax
- 5 Dialling and storing numbers
- 6 Printing reports
- 7 Making copies
- Copy settings
- 8 Printing photos from a memory card or USB Flash memory drive
- 9 Printing photos from a camera
- A Routine maintenance
- B Glossary
- Index
- brother ARL/ASA/NZ
Chapter 5
28
g To choose where the number will be
stored, do one of the following:
To accept the displayed next
available One Touch location, press
OK.
To enter a different One Touch
location, press a number using the
buttons on the LCD.
Press OK.
Note
If the One Touch location you choose is
already taken, the OK button on the LCD
will not work. Choose a different location.
h Do one of the following:
Enter the name (up to 16 characters)
using the buttons on the LCD.
Press OK.
(To help you enter letters, see
Entering Text in appendix C of the
Basic User’s Guide.)
To store the number without a name,
press OK.
i Press OK to confirm the fax or telephone
number.
j When the LCD displays your settings,
press OK to confirm.
k Press Stop/Exit.
Storing Speed Dial numbers
from Outgoing Calls 5
You can also store Speed Dial numbers from
the Outgoing Call history.
a Press Redial/Pause.
You can also choose the number by
pressing (Call History).
b Press the Outgoing Call tab.
c Press a or b to display the name or
number you want to store.
d Press the name or number you want to
store.
e Press More.
f Press Add to Speed Dial.
g Do one of the following:
Enter the name (up to 16 characters)
using the buttons on the LCD.
Press OK.
(To help you enter letters, see
Entering Text in appendix C of the
Basic User’s Guide.)
To store the number without a name,
press OK.
h Press OK to confirm the fax or telephone
number you want to store.
i Do one of the following:
Enter the second fax or telephone
number (up to 20 digits) using the
buttons on the LCD.
Press OK.
If you do not want to store a second
number, press OK.