User Manual

Chapter 4
24
e Enter a four-digit secure code using the
buttons on the LCD.
This is the same as the security code of
the fax machine you are polling.
Press OK.
f Enter the fax number you are polling
using One Touch, Phone Book or the
dial pad on the control panel.
g Press Mono Start or Colour Start.
Setup to receive delayed polling 4
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a Press (FAX).
b Press d or c to display Polling RX.
c Press Polling RX.
d Press Timer.
e Enter the time (in 24-hour format) you
want to start polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
f Enter the fax number you are polling
using One Touch, Phone Book or the
dial pad on the control panel.
g Press Mono Start or Colour Start.
The machine makes the polling call at
the time you entered.
Sequential polling
(Monochrome only)
4
Sequential polling lets you request
documents from several fax machines in one
operation.
a Press (FAX).
b Press d or c to display Polling RX.
c Press Polling RX.
d Press Standard, Secure or Timer.
e Do one of the following:
 If you chose Standard, go to
step f.
 If you chose Secure, enter a four-
digit number, press OK, go to step f.
 If you chose Timer, enter the time
(24-hour format) you want to begin
polling and press OK, go to step f.
f Press d or c to display Broadcasting.
g Press Broadcasting.
h Do one of the following:
 Press Add Number and enter a
number using the buttons on the
LCD.
Press OK.
 Press Phone Book. Press
to choose Alphabetical Order or
Numerical Order. Press a or b to
select a number.
Press OK.
Note
If you chose Numerical Order:
Speed Dial numbers start with #.
One Touch numbers start with l.
i After you have entered all the fax
numbers by repeating step h, press OK.