User Manual
Table Of Contents
- BASIC USER’S GUIDE MFC-J6910DW
- User's Guides and where do I find it?
- Table of Contents
- 1 General information
- 2 Loading paper
- 3 Loading documents
- 4 Sending a fax
- 5 Receiving a fax
- 6 Telephone and external devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 7 Dialling and storing numbers
- 8 Making copies
- 9 Printing photos from a memory card or USB Flash memory drive
- 10 How to print from a computer
- 11 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
- brother ARL/ASA/NZ
Loading paper
23
2
Tray use in Fax mode 2
You can change the default tray the machine
will use for printing received faxes.
Auto Select will allow your machine to
take paper from Tray #1 first, or from Tray #2
if:
Tray #2 is set to a different paper size that
is more suitable for the received faxes.
Both trays are using the same size paper
and Tray #1 is not set to use plain paper.
a Press Tray Setting.
b Press a or b to display Tray Use:Fax.
c Press Tray Use:Fax.
d Press Tray#1, Tray#2 or
Auto Select.
e Press Stop/Exit.
Secure Paper Feed mode for
A3 size Short Grain Paper 2
If your printed pages are smudged when
using A3 paper, your paper may be short
grain paper. Choose A3 - Short Grain
and set it to On to avoid this problem.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display
A3 - Short Grain.
e Press A3 - Short Grain.
f Press On.
g Press Stop/Exit.
Note
• If you are not sure about the type of paper
you are using, consult the paper
packaging or manufacturer for paper
specifications.
• Printing will be slower when using the
A3 - Short Grain.