User Manual

9
9
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
For details, see Entering Text in Appendix C of the
Basic User’s Guide.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press Station ID.
e Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
f Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
g Press Stop/Exit.
10
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature, see Transmission
Verification Report in chapter 4 of the Basic User’s
Guide.
11
Set Tone or Pulse dialling
mode
Your machine comes set for Tone dialling service. If
you have Pulse dialling service (rotary), you need to
change the dialling mode.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press a or b to display Tone/Pulse.
e Press Tone/Pulse.
f Press Pulse (or Tone).
g Press Stop/Exit.
Note
• Press to cycle between letters, numbers
and special characters. (The characters
available may differ depending on your
country.)
• If you need to enter a character that is on the
same button as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, press .
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.