User Manual
Table Of Contents
- Product Safety Guide
- Symbols and Conventions Used in the Documentation
- Compilation and Publication Notice
- Choose a Safe Location for Your Product
- Connect the Product Safely
- Use the Product Safely
- Product Warranty & Liability
- Approval Information (MFC Models Only)
- Wiring Information (U.K. Only)
- Declaration of Conformity (Europe Only)
- Declaration of Conformity for RE Directive 2014/53/EU (Europe Only) (Applicable to Models with Radio Interfaces)
- Wireless LAN (Models with Wireless LAN Function Only)
- NFC (Models with NFC Function Only)
- LAN Connection (Models with Wired LAN Function Only)
- Recycling Information in Accordance with the WEEE and Battery Directives
- Imaging Equipment Voluntary Agreement
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Brother Customer Service
- Unlawful Use of Copying or Scanning Equipment
- Information for compliance with Commission Regulation 801/2013
Copyrighted works cannot be copied or scanned lawfully, subject to the “fair dealing” exception
relating to sections of a copyrighted work. Multiple copies would indicate improper use. Works of
art should be considered the equivalent of copyrighted works.
Information for compliance with Commission
Regulation 801/2013
Models Power consumption
Networked Standby
1
DCP-J572DW Approx. 1.0 W
DCP-J772DW/DCP-J774DW Approx. 1.2 W
MFC-J491DW/MFC-J497DW Approx. 1.3 W
MFC-J890DW/MFC-J895DW Approx. 1.9 W
1
All network ports activated and connected
How to enable/disable Wireless LAN
• (DCP-J572DW/MFC-J491DW/MFC-J497DW) To turn on or off the wireless network
connection, press Settings, and then press a or b to select the following:
1. Select [Network]. Press OK.
2. Select [WLAN Enable]. Press OK.
3. Select [On] or [Off]. Press OK.
• (DCP-J772DW/DCP-J774DW) To turn on or off the wireless network connection, press
[Settings] > [All Settings] > [Network] > [WLAN Enable] > [On] or
[Off].
• (MFC-J890DW/MFC-J895DW) To turn on or off the wireless network connection, press
[Settings] > [All Settings] > [Network] > [Network I/F] > [WLAN] or
[Wired LAN].
17