User Manual

NOTE
• MostoftheillustrationsinthisQuick Setup GuideshowtheMFC-J890DW.
• Saveallpackingmaterialsandtheboxincaseforanyreasonyoumust
shipyourmachine.
• You must purchase the correct interface cable for the interface you
want to use. A USB cable is included with some models.
USB cable
WerecommendusingaUSB2.0cable(TypeA/B)thatisnomorethan
2metreslong.
Ethernet (Network) cable (MFC-J890DW/J895DW only)
Useastraight-throughCategory5(orgreater)twisted-paircablefor
10BASE-Tor100BASE-TXFastEthernetNetwork.
2
Load paper in the paper tray
1
Unpack the machine and check the components
Thecomponentsincludedintheboxmaydifferdependingonyourcountry.
Removetheprotectivetapeandfilmcoveringthemachineandthetouchscreen.
Connectthetelephonelinecord.
UsethesocketmarkedLINE.
Followthetouchscreen
instructionstounpackandinstall
theinkcartridges.
Themachinewillpreparetheink
tubesystemforprinting.
Whenthemachinehasfinishedtheinitialcleaning
process,followthetouchscreeninstructionsto
configurethemachine’ssettings.
• Checkprintquality
• SetBrotherLCDMessagedefaults
• Printtheinstallationsheet
Opentheinkcartridgecover,andthen
removetheorangeprotectivepart
fromthemachine.
Afterturningthemachineon,youmayneedtosetyour
countryorlanguage(dependingonyourmachine).
Ifrequired,followthetouchscreeninstructions.
Connectthepowercord.Themachinewillpower
onautomatically.
NOTE
Ifyouaresharingonetelephonelinewithanexternal
telephone,connectitasshownbelow.
NOTE
Youcanadjustthecontrolpanelangletoreadthe
touchscreenmoreeasily.
NOTE
Donotthrowawaytheorangeprotectivepart.
Youwillneeditifyoutransportthemachine.
a. Extensiontelephone
b. Externaltelephone
QuickSetupGuide
DCP-J772DW / DCP-J774DW / MFC-J890DW / MFC-J895DW
ReadtheProduct Safety Guidefirst,thenreadthisQuick Setup Guide
forthecorrectinstallationprocedure.
3
Connect the power cord
6
Install the inbox ink cartridges
4
Select your country
or language
(Initial setup only)
7
Machine settings
D01416001-01
UK
VersionC
Inbox Ink Cartridges*
• Black
• Yellow
• Cyan
• Magenta
*
Inkcartridgescontain
approximatelythesamepage
yieldasreplacementcartridges
(Standard).
Quick Setup Guide
Product Safety Guide
Power Cord
(for UK) (for others)
Brother Installation Disc Telephone Line Cord
(MFC models only)
1. Press [Settings]>[All Settings]>
[Initial Setup]>[Local Language].
2. Pressyourlanguage.
3. Press .
8
Select your language
(if needed and only for
certain models)
9
Connect the telephone line cord (MFC models only)
Ifyouarenotusingyourmachineasafax,goto
10
.
ThelatestmanualsareavailableattheBrotherSolutionsCenter:
support.brother.com/manuals
WatchourFAQvideosforhelp
withsettingupyourBrother
machine.
support.brother.com/videos
5
Set the date and time
Followthetouchscreeninstructionstosetthedateand
time.
Quicklyshakejusttheblack
inkcartridgehorizontally
15timesasshown,before
insertingitintothemachine.
Pullthepapertraycompletely
outofthemachine.
Opentheoutputpapertray
covera. Fanthepaperwellandloaditinthetray.
Closetheoutputpapertraycover,and
thenslowlypushthetraycompletely
intothemachine.
Adjustthepaperguides.
NOTE
Pulloutthepapersupporta,andunfold
thepapersupportapbsothatthe
printedpagesdonotfall.
Secure Network Access
Yourmachine’sdefaultpasswordisonthelabelontheback
ofthemachine(precededby"Pwd").
Westronglyrecommendyouchangeittoprotectyour
machinefromunauthorisedaccess.



([DPSOHIRU8.


(Example for UK)