User Manual

Information for compliance with Commission
Regulation 801/2013
Models Power Consumption
Networked Standby
1
DCP-J1200W Approx. 1.1 W
MFC-J4340DW Approx. 1.4 W
MFC-J4540DW Approx. 1.9 W
1
All network ports activated and connected
How to enable/disable Wireless LAN
DCP-J1200W
To turn on or off the wireless network connection, press and at the same time, and
then press MONO COPY.
MFC-J4340DW
To turn on or off the wireless network connection, press Settings, and then press a or b to
select the following:
1. Select [Network]. Press OK.
2. Select [WLAN(Wi-Fi)]. Press OK.
3. Select [WLAN Enable]. Press OK.
4. Select [On] or [Off]. Press OK.
MFC-J4540DW
To turn on or off the wireless network connection, press
[Settings] > [All
Settings] > [Network] > [Network I/F] > [Wired LAN] or [WLAN(Wi-Fi)].
Disclaimer
Brother disclaims any warranties with respect to avoidance, mitigation or non-occurrence of any
breakdowns, malfunctions, system crashes, hang-ups, virus infections, damage and
disappearances of data, and any other kind of errors by using this product. AS LONG AS
PERMITTED BY APPLICABLE LAWS, BROTHER WILL NOT BE LIABLE FOR ANY LOST
REVENUES OR INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, OR
PUNITIVE DAMAGES OF THE CUSTOMERS OR ANY OTHER THIRD PARTY.
17