Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Table of Contents
- 1 Introduction
- 2 Configuring your machine for a network with an Ethernet cable connection
- Overview
- IP addresses, subnet masks and gateways
- Step by step chart
- Setting up the IP address and subnet mask
- Changing the print server settings
- Using the BRAdmin Light utility to change the print server settings
- Using the BRAdmin Professional utility to change the wireless settings (For Windows®)
- Using the Remote Setup to change the print server settings (Not available for DCP models)
- Using the control panel to change the print server settings
- 3 Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
- Overview
- Wireless network terms and concepts
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using the machine’s control panel Setup Wizard to configure your wireless network machine
- Configuration using the SES/WPS/AOSS control panel menu (Infrastructure mode only)
- Configuration using the PIN Method of Wi-Fi Protected Setup™ (Infrastructure mode only)
- Configuration using the Brother installer application on the CD-ROM to configure your wireless network machine
- Configuring your machine for a wireless network
- 4 Wireless configuration for Windows® using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)
- 5 Wireless Configuration for Macintosh® using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)
- 6 Control panel setup
- Network menu
- TCP/IP
- Setup Misc. (MFC-5490CN only)
- Setup Wizard (wireless network only)
- SES/WPS/AOSS (wireless network only)
- WPS w/PIN code (wireless network only)
- WLAN Status (wireless network only)
- Ethernet (wired network only)
- E-mail/I-FAX (For MFC-6490CW and MFC-6890CDW)
- Scan to FTP (For MFC-5890CN and MFC-6490CW)
- Scan to FTP (For MFC-6890CDW)
- Time Zone (For MFC-6490CW and MFC-6890CDW)
- Network I/F (Not available for MFC-5490CN and MFC-5890CN)
- LDAP (For MFC-6890CDW)
- Restoring the network settings to factory default
- Printing the Network Configuration List
- Network menu
- 7 Driver Deployment Wizard (Windows® only)
- 8 Network printing from Windows® basic TCP/IP Peer-to-Peer printing
- 9 Network printing from a Macintosh®
- 10 LDAP operation (For MFC-6890CDW)
- 11 Internet fax and Scan to E-mail (For MFC-6490CW and MFC-6890CDW)
- Internet fax overview
- Getting connected
- Control panel key functions
- Sending an Internet fax
- Manually entering text
- Receiving E-mail or Internet fax
- Receiving an Internet fax to your computer
- Forwarding received E-mail and fax messages
- Relay broadcasting
- TX Verification Mail
- Setup Mail TX
- Setup Mail RX
- Error mail
- Important information on Internet fax
- Scan to E-mail Server overview (MFC-6490CW and MFC-6890CDW)
- Internet fax overview
- 12 Security features (For MFC-6490CW and MFC-6890CDW)
- 13 Troubleshooting
- Appendix A
- Appendix B
- Appendix C
- Index
vi
3 Configuring your machine for a wireless network
(Not available for MFC-5490CN and MFC-5890CN) 18
Overview..................................................................................................................................................18
Wireless network terms and concepts.....................................................................................................19
SSID (Service Set Identifier) and channels .......................................................................................19
Authentication and encryption ...........................................................................................................19
Step by step chart for wireless network configuration ............................................................................21
For Infrastructure mode.....................................................................................................................21
For Ad-hoc mode...............................................................................................................................22
Confirm your network environment..........................................................................................................23
Connected to a computer with an access point in the network (Infrastructure mode).......................23
Connected to a wireless capable computer without an access point in the network
(Ad-hoc mode)...............................................................................................................................23
Confirm your wireless network setup method..........................................................................................24
Configuration using the machine’s control panel Setup Wizard to configure your wireless
network machine ...........................................................................................................................24
Configuration using the SES/WPS/AOSS control panel menu (Infrastructure mode only) ...............24
Configuration using the PIN Method of Wi-Fi Protected Setup™ (Infrastructure mode only)............25
Configuration using the Brother installer application on the CD-ROM to configure your wireless
network machine ...........................................................................................................................26
Configuring your machine for a wireless network....................................................................................27
Using the Setup Wizard from the control panel .................................................................................27
Using the SES/WPS/AOSS control panel menu to configure your machine for a wireless
network..........................................................................................................................................31
Using the PIN Method of Wi-Fi Protected Setup™............................................................................35
Using the Brother automatic installer application on the CD-ROM to configure your machine
for a wireless network....................................................................................................................37
4 Wireless configuration for Windows
®
using the Brother installer application
(Not available for MFC-5490CN and MFC-5890CN) 38
Configuration in Infrastructure mode .......................................................................................................38
Before configuring the wireless settings............................................................................................38
Configure the wireless settings..........................................................................................................39
Configuration using the SES/WPS/AOSS control panel menu (One-Push method) ...............................45
Before configuring the wireless settings............................................................................................45
Configure the wireless settings..........................................................................................................45
Configuration in Ad-hoc Mode .................................................................................................................50
Before configuring the wireless settings............................................................................................50
Configure the wireless settings..........................................................................................................50
5 Wireless Configuration for Macintosh
®
using the Brother installer application
(Not available for MFC-5490CN and MFC-5890CN) 58
Configuration in Infrastructure mode .......................................................................................................58
Before configuring the wireless settings............................................................................................58
Configure the wireless settings..........................................................................................................59
Configuration using the SES/WPS/AOSS control panel menu (One-Push method) ...............................65
Before configuring the wireless settings............................................................................................65
Configure the wireless settings..........................................................................................................65
Configuration in Ad-hoc Mode .................................................................................................................69
Before configuring the wireless settings............................................................................................69
Configure the wireless settings..........................................................................................................69