User Manual

9
8
Choose a Receive Mode
There are three possible receive modes: Fax Only,
Fax/Tel and Manual.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press Receive Mode.
e Press Fax Only, Fax/Tel or Manual.
f Press Stop/Exit.
9
Set up the TAD
You must record an outgoing message in order to use
the TAD mode.
a Record the TAD outgoing message
(TAD Message).
b Activate TAD mode.
Press . The button will light when the mode
is active.
10
Set the LCD contrast
(If needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a Press MENU.
b Press a or b to display General Setup.
c Press General Setup.
d Press a or b to display LCD Settings.
e Press LCD Settings.
f Press LCD Contrast.
g Press Light, Med or Dark.
h Press Stop/Exit.
For details, see Using receive modes in
Chapter 6 of the User's Guide.
You control the
telephone line and must
answer every call
yourself.
Manual
Your machine
automatically answers
every call as a fax.
Fax Only
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the telephone
will ring for you to pick
up the call.
Fax/Tel
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
If you set Fax Detect
to On, the Fax
messages are printed.
Manual
Yes
No
No
Yes
Yes
No
Are you using the built-in
TAD?
See Digital TAD in
Chapter 9 of the
User's Guide.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Are you using the voice message
function of an external telephone
answering device?
Do you want the machine to
answer fax and telephone calls
automatically?
Yes
No
See Outgoing message (OGM) in Chapter 9
of the User’s Guide.
If the TAD Mode is on, it overrides your
Receive Mode setting. The built-in digital
TAD answers voice calls. If the call is a fax,
you can receive a fax automatically. For
details, see Digital TAD in Chapter 9 of the
User’s Guide.
Note
You can also adjust the angle of the display by
lifting it.