User Manual

Making copies
85
12
Copy settings 12
You can change the copy settings temporarily
for the next multiple copies.
The machine returns to its default settings
after 1 minute, or if the Mode Timer returns
the machine to Fax mode. (See Mode Timer
on page 24.)
If you have finished choosing settings, press
Mono Start or Color Start.
If you want to choose more settings, press
d or c.
Note
You can save some of the settings that
you use most often by setting them as a
favourite (up to three can be saved).
These settings will stay until you change
them again. (See Setting your favourites
on page 90.)
Changing copy speed and
quality 12
You can choose from a range of quality. The
factory setting is Normal.
 Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
 Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.
 Best
Use best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a Press (Copy).
b Load your document.
c Enter the number of copies you want.
d Press d or c to display Quality.
e Press Quality.
f Press Fast, Normal or Best.
g If you do not want to change additional
settings, press Mono Start or
Color Start.