User Manual

84
12
How to copy 12
Entering Copy mode 12
When you want to make a copy, press
(Copy) to illuminate it in blue.
The LCD shows:
1 No. of Copies
Press the number box directly and enter the
number you want.
Also you can enter the number of copies by
pressing or on the screen (as shown
above).
Press d or c to scroll through the copy
options. Press the option that you want to set.
 Quality (See page 85.)
 Enlarge/ Reduce (See page 86.)
 Paper Type (See page 88.)
 Paper Size (See page 89.)
 Brightness (See page 88.)
 Contrast (See page 88.)
 Stack/Sort (See page 88.)
 Page Layout (See page 87.)
 Book Copy (See page 89.)
 Watermark Copy (See page 89.)
 Favorite Settings (See page 90.)
Note
• The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer
on page 24.)
• Book Copy and Watermark Copy
features are supported by technology
from Reallusion, Inc.
Making a single copy 12
a Press (Copy).
b Load your document.
(See Loading documents on page 21.)
c Press Mono Start for B&W copy or
Color Start for color copy.
Making multiple copies 12
You can make up to 99 copies in one print run.
a Press (Copy).
b Load your document.
(See Loading documents on page 21.)
c Enter the number of copies you want.
d Press Mono Start for B&W copy or
Color Start for color copy.
Note
To sort the copies, press d or c to choose
Stack/Sort. (See Sorting copies using
the ADF on page 88.)
Stop copying 12
To stop copying, press Stop/Exit.
Making copies 12
Normal
Normal
100%
100%
Plain Paper
Plain Paper
COPY
COP Y
Quality Paper Type
Favorite
Enlarge/
Reduce
1