User Manual
Table Of Contents
- USER’S GUIDE MFC-790CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II Fax
- 5 Sending a Fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone and External devices
- 8 Dialling and storing numbers
- 9 Digital TAD
- 10 Printing Reports
- 11 Polling
- 5 Sending a Fax
- Section III Copy
- Section IV Direct Photo Printing
- Section V Software
- Section VI Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- Troubleshooting
- Error and Maintenance messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner glass
- Cleaning the machine’s printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the print alignment
- Checking the ink volume
- Uninstalling and installing the handset and handset cradle
- Machine Information
- Packing and shipping the machine
- C Menu and Features
- D Specifications
- E Glossary
- Index
- brother CHN-ENG
58
7
Voice operations 7
Voice calls can be made either with the
handset, the speaker phone, an extension or
external telephone, by dialling manually, or
by using Quick Dial numbers.
Making a telephone call 7
a To start a voice call, do one of the
following:
Pick up the handset.
Press Speaker Phone.
b When you hear the dial tone, enter a
number using the dial pad or pressing
the Speed Dial.
c If you pressed Speaker Phone, speak
clearly toward the microphone .
d To hang up, do one of the following:
Replace the handset.
Press Speaker Phone.
Answering calls with the
Speaker Phone 7
When the machine rings, instead of lifting the
handset, press Speaker Phone on the
machine. Speak clearly toward the
microphone . To end the call, press
Speaker Phone.
Note
If you have a bad connection, your caller
might hear your voice echoed during the
call. If you experience this problem, pick
up the handset, or hang up and try the call
again.
Hold 7
a Press Erase to put a call on Hold.
You can replace the handset without
disconnecting the call.
b Pick up the machine's handset or press
Speaker Phone to release the call from
Hold.
Note
You can pick up an extension telephone
and continue speaking without releasing
the call from Hold on the machine.
Telephone and External devices 7










