User Manual

34
5
Entering Fax mode 5
When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in blue.
The LCD shows:
Press d or c to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
 Fax Resolution (See page 39.)
 Contrast (See page 38.)
 Broadcasting (See page 37.)
 Preview (See page 36.)
 Delayed Fax (See page 40.)
 Batch TX (See page 40.)
 Real Time TX (See page 39.)
 Polled TX (See page 81.)
 Polling RX (See page 79.)
 Overseas Mode (See page 40.)
 Glass ScanSize (See page 35.)
 Set New Default (See page 41.)
 Factory Reset (See page 41.)
Press the option you want.
Faxing from the ADF 5
a Press (Fax).
b Place the document face down in the
ADF. (See Using the ADF on page 21.)
c Enter the fax number using the dial pad.
You can also enter the fax number by
pressing Speed Dial, press the
number you want and press
Send a fax.
Note
You can preview a fax message before
sending it by setting Preview to On.
For details, see How to preview an
outgoing fax on page 36.
d Press Mono Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a mono fax when the memory
is full it will be sent in real time.
Sending a Fax 5
FAX/TEL
FAX/T EL
Fax Resolution
Standard
Standard
Contrast
Auto
Auto
Broadcasting
Off
Off
Speed DialHistory