User Manual
Table Of Contents
- USER’S GUIDE MFC-790CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II Fax
- 5 Sending a Fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone and External devices
- 8 Dialling and storing numbers
- 9 Digital TAD
- 10 Printing Reports
- 11 Polling
- 5 Sending a Fax
- Section III Copy
- Section IV Direct Photo Printing
- Section V Software
- Section VI Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- Troubleshooting
- Error and Maintenance messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner glass
- Cleaning the machine’s printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the print alignment
- Checking the ink volume
- Uninstalling and installing the handset and handset cradle
- Machine Information
- Packing and shipping the machine
- C Menu and Features
- D Specifications
- E Glossary
- Index
- brother CHN-ENG
General setup
27
3
Speaker Volume 3
You can choose a range of speaker volume
levels, from High to Off.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Volume.
e Press Volume.
f Press Speaker.
g Press Off, Low, Med or High.
h Press Stop/Exit.
You can also adjust the speaker volume by
pressing Speaker Phone.
a Press Speaker Phone.
b Press d or c to display Volume.
c Press Volume.
d Press d or c.
This setting will stay until you change it
again.
e Press Speaker Phone.
Note
• You can adjust the speaker volume while
you are listening to your outgoing
message (OGM) and incoming messages
(ICM’s) by pressing d or c.
• If you turn Incoming Recording Monitor to
OFF the Speaker for screening calls will
be disabled and you won’t hear callers
leaving messages. The volume for other
operations can still be controlled using
d or c.
Sleep Mode 3
You can choose how long the machine must
be idle (from 1 to 60 minutes) before it goes
into sleep mode. The timer will restart if any
operation is carried out on the machine.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Sleep Mode.
e Press Sleep Mode.
f Press 1 Min, 2 Mins, 3 Mins,
5 Mins, 10 Mins, 30 Mins or
60 Mins which is the length of time the
machine is idle before entering sleep
mode.
g Press Stop/Exit.