User Manual

Chapter 13
104
Color Enhancement 13
You can turn on the color enhancement
feature to print more vivid images. Printing
time will be slower.
a Press Print Setting.
b Press a or b to display
Color Enhance.
c Press Color Enhance.
d Do one of the following:
 If you want to customize the White
Balance, Sharpness or Color
Density, press On, and then go to
step e.
 If you do not want to customize,
press Off.
Go to step h.
e Press White Balance, Sharpness or
Color Density.
f Press d or c to adjust the degree of the
setting.
Press OK.
g Do one of the following:
 If you want to customize another
color enhancement, repeat steps e
to f.
 If you want to change other settings,
press to display the print setting
menu and press the setting you want
to change. (See page 101.)
h If you do not want to change additional
settings, press .
Press Color Start to print.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will affect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other color. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Color Density
This setting adjusts the total amount of
color in the image. You can increase or
decrease the amount of color in an image
to improve a washed out or weak picture.