User Manual
Table Of Contents
- USER’S GUIDE MFC-790CW MFC-990CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II: Fax
- 5 Sending a Fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone and External devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 8 Dialling and storing numbers
- 9 Digital TAD
- 10 Printing Reports
- 11 Polling
- 5 Sending a Fax
- Section III: Copy
- Section IV: Direct Photo Printing
- 13 Printing photos from a memory card or USB Flash memory drive
- 14 Printing photos from a camera
- 15 Wireless photo printing (MFC-990CW only)
- Section V: Software
- Section VI: Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- Troubleshooting
- Error and Maintenance messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner glass
- Cleaning the machine’s printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the print alignment
- Checking the ink volume
- Uninstalling and installing the handset and handset cradle (MFC-790CW only)
- Machine Information
- Packing and shipping the machine
- C Menu and Features
- D Specifications
- E Glossary
- Index
- brother ARL/ASA/NZ
Chapter 8
72
Storing numbers 8
You can set up your machine to do the
following types of easy dialling: Speed Dial
and Groups for broadcasting faxes. When
you dial a Quick Dial number, the LCD shows
the name, if you stored it, or the number.
Note
If you lose electrical power, the Quick Dial
numbers that are in the memory will not be
lost.
Storing a pause 8
Press Pause or Redial/Pause to put a
3.5-second pause between numbers. If you
are dialling overseas, you can press Pause
or Redial/Pause as many times as needed to
increase the length of the pause.
Storing Speed Dial numbers 8
You can store up to 100 2-digit Speed Dial
locations with a name, and each name can
have two numbers (Fax/Tel1: and
Fax/Tel2:). When you dial you will only
have to press a few keys. (For example:
Press Speed Dial, the number you want to
make a call and Make a phone call.)
a Press Speed Dial.
b Press More.
c Press Set Speed Dial.
d Do one of the following:
Enter the name (up to 16 characters)
using the buttons on the LCD.
Press OK.
(To help you enter letters, see
Entering Text on page 195.)
To store the number without a name,
press OK.
e Enter the first fax or telephone number
(up to 20 digits) using the buttons on the
LCD.
Press OK.
f Do one of the following:
Enter the second fax or telephone
number (up to 20 digits) using the
buttons on the LCD.
Press OK.
If you do not want to store a second
number, press OK.
g To choose where the number will be
stored, do one of the following:
To accept the displayed next
available Speed Dial location, press
OK.
To enter a different Speed Dial
location, press a 2-digit number
using the buttons on the LCD.
Press OK.
Note
If the 2-digit Speed Dial location you
choose is already taken, the OK button on
the LCD will not work. Choose a different
location.
h When the LCD displays your settings,
press OK to confirm.
i Do one of the following:
To store another Speed Dial
number, go to step b.
To finish storing numbers, press
Stop/Exit.