User Manual
Table Of Contents
- USER’S GUIDE MFC-790CW MFC-990CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II: Fax
- 5 Sending a Fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone and External devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 8 Dialling and storing numbers
- 9 Digital TAD
- 10 Printing Reports
- 11 Polling
- 5 Sending a Fax
- Section III: Copy
- Section IV: Direct Photo Printing
- 13 Printing photos from a memory card or USB Flash memory drive
- 14 Printing photos from a camera
- 15 Wireless photo printing (MFC-990CW only)
- Section V: Software
- Section VI: Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- Troubleshooting
- Error and Maintenance messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner glass
- Cleaning the machine’s printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the print alignment
- Checking the ink volume
- Uninstalling and installing the handset and handset cradle (MFC-790CW only)
- Machine Information
- Packing and shipping the machine
- C Menu and Features
- D Specifications
- E Glossary
- Index
- brother ARL/ASA/NZ
Chapter 7
60
Telephone Service for
Australia
7
Telstra
®
FaxStream
®
Duet
®
(Distinctive Ring) 7
Telstra
®
FaxStream
®
Duet
®
is an enhanced
Public Switched Telephone Service (PSTS)
offered by Telstra
®
that allows you to have an
additional number on one phone line, with its
own distinctive ring pattern. Telstra
®
FaxStream
®
Duet
®
is a call handling feature
that helps users distinguish voice and
facsimile calls. With FaxStream
®
Duet
®
,
incoming calls to a fax number are
announced by a different, distinctive ring
signal. Only one call can be answered (or
made) at any one time and while this call is in
progress, incoming calls to either number will
be presented with a busy tone.
Your machine has a Distinctive Ring function,
allowing you to dedicate one phone number
just for receiving faxes.
Note
After you have set the Distinctive Ring
feature to On, the receive mode is set to
Manual automatically. Your Distinctive
Ring Number does not allow Voice
calls - only Faxes. You can not change the
receive mode from Manual mode while
the Distinctive Ring is set to on.
What is the Advantage of using
Telstra
®
FaxStream
®
Duet
®
Function?7
Using Telstra
®
FaxStream
®
Duet
®
is the
most efficient way to receive both fax and
telephone calls on the same line. When the
voice call comes in, all phones (extension
and external) and the fax machine will ring to
alert you to pick it up. If a fax call comes in,
the fax machine will answer automatically
without ringing, whereas the extension and
external phones will ring twice with a
distinctive ring pattern. It is also a more
efficient way of operating a Fax machine with
an extension phone as you do not have to use
the remote activation codes. It gives you two
independent numbers without the higher cost
of a second line.