User Manual
Table Of Contents
- USER’S GUIDE MFC-790CW MFC-990CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II: Fax
- 5 Sending a Fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone and External devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 8 Dialling and storing numbers
- 9 Digital TAD
- 10 Printing Reports
- 11 Polling
- 5 Sending a Fax
- Section III: Copy
- Section IV: Direct Photo Printing
- 13 Printing photos from a memory card or USB Flash memory drive
- 14 Printing photos from a camera
- 15 Wireless photo printing (MFC-990CW only)
- Section V: Software
- Section VI: Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- Troubleshooting
- Error and Maintenance messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner glass
- Cleaning the machine’s printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the print alignment
- Checking the ink volume
- Uninstalling and installing the handset and handset cradle (MFC-790CW only)
- Machine Information
- Packing and shipping the machine
- C Menu and Features
- D Specifications
- E Glossary
- Index
- brother ARL/ASA/NZ
Chapter 15
122
Device Address 15
The device address is the ID number which
identifies your machine, and it cannot be
edited.
Device Name 15
You can name your machine to distinguish
from other Bluetooth
®
wireless technology
enabled devices.
a Press MENU.
b Press a or b to display Bluetooth.
c Press Bluetooth.
d Press a or b to display Settings.
e Press Settings.
f Press a or b to display Device Name.
g Press Device Name.
h Enter the name (up to 16 characters)
using the buttons on the LCD.
Press to choose numbers or
characters.
Press OK.
Note
You cannot enter special characters.
i Press Stop/Exit.
Print settings 15
Once you set the Print settings they will
remain the same until you change them.
Print Quality 15
a Press MENU.
b Press a or b to display Bluetooth.
c Press Bluetooth.
d Press a or b to display
Print Settings.
e Press Print Settings.
f Press a or b to display
Print Quality.
g Press Print Quality.
h Press Normal or Photo.
i Press Stop/Exit.
Paper Type 15
a Press MENU.
b Press a or b to display Bluetooth.
c Press Bluetooth.
d Press a or b to display
Print Settings.
e Press Print Settings.
f Press a or b to display Paper Type.
g Press Paper Type.
h Press Plain Paper, Inkjet Paper,
Brother BP71 or Other Glossy.
i Press Stop/Exit.