User Manual
Table Of Contents
- USER’S GUIDE MFC-790CW MFC-990CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II: Fax
- 5 Sending a Fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone and External devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 8 Dialling and storing numbers
- 9 Digital TAD
- 10 Printing Reports
- 11 Polling
- 5 Sending a Fax
- Section III: Copy
- Section IV: Direct Photo Printing
- 13 Printing photos from a memory card or USB Flash memory drive
- 14 Printing photos from a camera
- 15 Wireless photo printing (MFC-990CW only)
- Section V: Software
- Section VI: Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- Troubleshooting
- Error and Maintenance messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner glass
- Cleaning the machine’s printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the print alignment
- Checking the ink volume
- Uninstalling and installing the handset and handset cradle (MFC-790CW only)
- Machine Information
- Packing and shipping the machine
- C Menu and Features
- D Specifications
- E Glossary
- Index
- brother ARL/ASA/NZ
Wireless photo printing (MFC-990CW only)
121
15
Set up your machine 15
Enable your Bluetooth
®
wireless technology 15
You can set Bluetooth
®
wireless technology
to On or Off.
a Press MENU.
b Press a or b to display Bluetooth.
c Press Bluetooth.
d Press a or b to display Turn On/Off.
e Press Turn On/Off.
f Press On (or Off).
g Do one of the following:
If you want to change any other
settings, press the setting you want
to change.
If you do not want to change other
settings, press Stop/Exit.
Pass key 15
This setting creates a pass key that
authorizes a Bluetooth
®
wireless technology
enabled device to communicate with your
machine. The default setting is 0000.
a Press MENU.
b Press a or b to display Bluetooth.
c Press Bluetooth.
d Press a or b to display Settings.
e Press Settings.
f Press a or b to display Pass Key.
g Press Pass Key.
h Enter a 4-digit number pass key using
the buttons on the LCD.
Press OK.
i Press Stop/Exit.
Communication Mode 15
This setting controls the level of security
between other Bluetooth
®
wireless
technology enabled devices and your
machine.
a Press MENU.
b Press a or b to display Bluetooth.
c Press Bluetooth.
d Press a or b to display Settings.
e Press Settings.
f Press a or b to display Comm. Mode.
g Press Comm. Mode.
h Do one of the following:
Press Public if you want to allow
any Bluetooth
®
wireless technology
enabled device to use your machine.
Press Private if you want to allow
a Bluetooth
®
enabled device that has
the device address registered.
Press Secure if you want to allow
anyone who has the correct pass key
to use your machine.
i Press Stop/Exit.
Settings
Settings
0000Pass Key
PublicComm. Mode
xx:xx:xx:xx:xx:xxDevice Address