User Manual
Table Of Contents
- USER’S GUIDE MFC-790CW MFC-990CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II: Fax
- 5 Sending a Fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Sending a fax at the end of a conversation
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone and External devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 8 Dialling and storing numbers
- 9 Digital TAD
- 10 Printing Reports
- 11 Polling
- 5 Sending a Fax
- Section III: Copy
- Section IV: Direct Photo Printing
- 13 Printing photos from a memory card or USB Flash memory drive
- 14 Printing photos from a camera
- 15 Wireless photo printing (MFC-990CW only)
- Section V: Software
- Section VI: Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- Troubleshooting
- Error and Maintenance messages
- Routine maintenance
- Replacing the ink cartridges
- Cleaning the outside of the machine
- Cleaning the scanner glass
- Cleaning the machine’s printer platen
- Cleaning the paper pick-up roller
- Cleaning the print head
- Checking the print quality
- Checking the print alignment
- Checking the ink volume
- Uninstalling and installing the handset and handset cradle (MFC-790CW only)
- Machine Information
- Packing and shipping the machine
- C Menu and Features
- D Specifications
- E Glossary
- Index
- brother ARL/ASA/NZ
Printing photos from a memory card or USB Flash memory drive
107
13
PhotoCapture Center™ print settings 13
You can change the print settings temporarily for the next print.
The machine returns to its default settings after 3 minutes, or if the Mode Timer returns the
machine to Fax mode. (See Mode Timer on page 25.)
Note
You can save the print settings you use most often by setting them as the default. (See Setting
your changes as a new default on page 112.)
Menu Selections Options 1 Options 2 Page
Print Quality
(Does not appear for
DPOF printing)
Normal/Photo — 108
Paper Type Plain Paper/Inkjet Paper/
Brother BP71/Other Glossy
— 108
Paper Size 10x15cm/13x18cm/A4/Letter (When A4 or Letter is chosen)
8x10cm/ 9x13cm/
10x15cm/13x18cm/
15x20cm/Max. Size
109
Brightness
(Does not appear
when
Enhance Photos is
chosen.)
— 109
Contrast
(Does not appear
when
Enhance Photos is
chosen.)
— 109
Print Setting
Print Setting
PhotoPrint Quality
Other GlossyPaper Type
10x15cmPaper Size
0
Dark Light
0