Owner`s manual

ADVANCED FAX USE
Remote Fax Options 49
Retrieving Fax Messages
1 Dial the machine’s number.
2 When you hear the beep, immediately enter your Remote Access Code
(the factory setting is 1 5 9 ).
3 As soon as you hear two short beeps, use the dial pad to press 9 6 2.
4 Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want
your fax messages forwarded, and then press # #.
5 After you hear the machine beep, hang up and wait.
The machine calls the remote fax machine and sends the stored documents. The remote fax
machine prints your fax messages.
Changing the Fax Forwarding Number
You can change the default setting of your fax forwarding number from a remote telephone/fax
machine using touch tone.
1 Dial the machine’s number.
2 When you hear the beep, immediately enter your Remote Access Code
(the factory setting is 1 5 9 ).
3 When you hear two short beeps, use the dial pad to press 9 5 4.
4 Enter the new number (up to 20 digits) of the remote fax machine where you want your fax
messages forwarded, and then press # #.
5 After you hear the machine beep, hang up.
You cannot use and # as dial numbers. However, if you want to store a pause,
press #.
You cannot use and # as dial numbers. However, if you want to store a pause,
press #.