Owner`s manual

38 Chapter 6
Checking and Cancelling a Scheduled Job in Memory
You can check or cancel a job that is waiting in memory.
If the machine is idle,
1 Press Menu, 2, 6.
Any waiting jobs appear on the display. If nothing is waiting, the screen displays NO JOB
WAITING.
2 If you have more than one job waiting, use or to select the job you want to cancel. Press
Set when the screen displays your selection—OR—If you have only one job waiting, go to Step 3.
3 Press 1 to cancel—OR—Press 2 to exit without cancelling.
To cancel another job, return to Step 2.
4 Press Stop/Exit.
Memory Security
This feature allows you to prevent unauthorised access to the machine. When switched ON, Memory
Security prohibits most functions. The following functions listed are available while Memory
Security is switched ON.
■ Receiving faxes into memory [limited by Memory Capacity].
■ Scheduled Delayed Transmission*
■ Polling*
■ Fax Forwarding*
■ Remote Retrieval
* Provided it was set before Memory Security was switched ON.
Using Memory Security
You need to use a password to switch Memory Security ON or OFF.
Setting Up Memory Security for the First Time
1 Press Menu, 2, 0, 1.
2 Enter a 4-digit number as a password.
3 Press Set.
The screen prompts you to re-enter the password.
4 Re-enter the password and press Set.
5 Press or to choose SET SECURITY.
6 Press Set.
The screen prompts you to enter the password.
You can check which jobs are remaining in memory by following Steps 1 and 2
above.
NEW PASSWD:XXXX
ENTER & SET KEY
VERIFY:XXXX
ENTER & SET KEY
PASSWORD:XXXX
ENTER & SET KEY