User Guide

SETUP SEND

6 - 7

ZleFB_MFC9800-FM5.5

Fax Resolution

When you have an original in the ADF or on the scanner glass, you can use the

Resolution key to temporarily change the setting. Press Resolution

repeatedly until the LCD shows the setting you want.

—OR—

You can change the default setting for all faxes.

Press Menu, 2, 2, 2.

Press or to select the resolution

you want, and then press Set.

Press Stop/Exit.

STANDARD - Suitable for most typed documents.

FINE - Good for small print; transmits a little slower than Standard resolution.

SUPER FINE - Good for small print or artwork; transmits slower than Fine

resolution.

PHOTO - Use when original has varying shades of gray; slowest transmission

time.

Composing Electronic Cover Page

The cover page is generated at the receiving party’s MFC. Your cover page

includes the name stored in the One Touch or Speed Dial memory. If you are

dialing manually, the name is left blank. (See

One Touch Dialing and Speed

Dialing

, page 7-4.)

The cover page indicates your Station ID and the number of pages you’re

sending. If you have Coverpage Setup set to ON (Menu, 2, 2, 8), the number

of pages remains blank. (See

Setting Station ID, page 4-3.)

You can include a comment on your cover page.

Instead of using one of the pre-programmed comments above, you can enter one

of two customized messages. (Up to 27 characters long) Use the chart on page

4-4 to help enter characters. (See

Composing Your Own Comments, page 6-8.)

2.FAX RESOLUTION

1.COMMENT OFF

2.PLEASE CALL

3.URGENT

4.CONFIDENTIAL

5.(USER DEFINED)

6.(USER DEFINED)