Network User's Guide

Web Based Management
77
6
Synchronize with SNTP server 6
SNTP is the protocol used to synchronize the time used by the machine for Authentication with the SNTP
time server (this time is not the time displayed on the LCD of the machine). You can synchronize the time
used by the machine on a regular basis with the Coordinated Universal Time (UTC) provided by the SNTP
time server.
Note
This function is not available in some countries.
a Click Network Configuration, and then click Configure Protocol.
b Select the SNTP check box to activate the setting.
c Click Advanced Setting.
 Status
Displays whether the SNTP server settings are enabled or disabled.
 SNTP Server Method
Choose AUTO or STATIC.
• AUTO
If you have a DHCP server in your network, the SNTP server will automatically obtain the address
from that server.
• STATIC
Enter the address you want to use.
 Primary SNTP Server Address, Secondary SNTP Server Address
Enter the server address (up to 64 characters).
 Primary SNTP Server Port, Secondary SNTP Server Port
Enter the Port number (1 to 65535).