Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Definitions of notes
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network (For MFC-9560CDW and MFC-9970CDW)
- Overview
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network (Automatic Wireless mode) (Infrastructure mode only) (Recommended)
- Configuration using the machine’s control panel Setup Wizard to configure your machine for a wireless network
- Configuration using the Brother installer application on the CD-ROM to configure your machine for a wireless network
- Configuration using the PIN Method of Wi-Fi Protected Setup to configure your machine for a wireless network (Infrastructure mode only)
- Configuring your machine for a wireless network (For Infrastructure mode and Ad-hoc mode)
- Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network (Automatic Wireless mode)
- Using the Setup Wizard from the control panel
- Configuring your machine when the SSID is not broadcast
- Configuring your machine for an enterprise wireless network
- Using the Brother installer application on the CD-ROM to configure your machine for a wireless network
- Using the PIN Method of Wi-Fi Protected Setup
- 4 Wireless configuration using the Brother installer application (For MFC-9560CDW and MFC-9970CDW)
- 5 Control panel setup
- Network menu
- TCP/IP
- Ethernet (wired network only)
- Status (For DCP-9055CDN, DCP-9270CDN, MFC-9460CDN and MFC-9465CDN)/Wired Status (For MFC-9560CDW and MFC-9970CDW)
- Setup Wizard (wireless network only)
- WPS or AOSS™ (wireless network only)
- WPS w/PIN Code (wireless network only)
- WLAN Status (wireless network only)
- MAC Address
- Set to Default (For MFC-9560CDW and MFC-9970CDW)
- Wired Enable (For MFC-9560CDW and MFC-9970CDW)
- WLAN Enable (For MFC-9560CDW and MFC-9970CDW)
- E-mail / IFAX (MFC-9970CDW and DCP-9270CDN (E-mail only))
- Fax to Server (For MFC-9970CDW)
- How to set a new default for Scan to FTP
- How to set a new default for Scan to Network
- Reset the network settings to the factory default
- Printing the Network Configuration List
- Printing the WLAN report (For MFC-9560CDW and MFC-9970CDW)
- Function table and default factory settings
- Network menu
- 6 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Password information
- Secure Function Lock 2.0
- Synchronize with SNTP server
- Store Print Log to Network
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser
- Changing the LDAP configuration using a web browser (For DCP-9270CDN and MFC-9970CDW)
- 7 LDAP operation (For DCP-9270CDN and MFC-9970CDW)
- 8 Internet fax (For MFC-9970CDW)
- 9 Security features
- Overview
- Managing your network machine securely using SSL/TLS
- Printing documents securely using SSL/TLS
- Sending or Receiving an E-mail securely
- Using IEEE 802.1x authentication
- Secure Management using BRAdmin Professional 3 (Windows®)
- Using Certificates for device security
- Managing multiple certificates
- 10 Troubleshooting
- Appendix A
- Index
- Network Glossary
- Table of Contents
- 1 Types of network connections and protocols
- 2 Configuring your machine for a network
- 3 Wireless network terms and concepts
- 4 Additional network settings from Windows®
- 5 Security terms and concepts
- Appendix A
- Index
iii
4 Wireless configuration using the Brother installer application
(For MFC-9560CDW and MFC-9970CDW) 35
Before configuring the wireless settings ..................................................................................................35
Configure the wireless settings................................................................................................................35
5 Control panel setup 40
Network menu..........................................................................................................................................40
TCP/IP...............................................................................................................................................40
Ethernet (wired network only)............................................................................................................43
Status (For DCP-9055CDN, DCP-9270CDN, MFC-9460CDN and MFC-9465CDN)/
Wired Status (For MFC-9560CDW and MFC-9970CDW) .............................................................43
Setup Wizard (wireless network only) ...............................................................................................43
WPS or AOSS™ (wireless network only)..........................................................................................43
WPS w/PIN Code (wireless network only).........................................................................................43
WLAN Status (wireless network only) ...............................................................................................43
MAC Address ....................................................................................................................................44
Set to Default (For MFC-9560CDW and MFC-9970CDW)................................................................44
Wired Enable (For MFC-9560CDW and MFC-9970CDW) ................................................................44
WLAN Enable (For MFC-9560CDW and MFC-9970CDW) ...............................................................44
E-mail / IFAX (MFC-9970CDW and DCP-9270CDN (E-mail only))...................................................44
Fax to Server (For MFC-9970CDW)..................................................................................................48
How to set a new default for Scan to FTP .........................................................................................50
How to set a new default for Scan to Network...................................................................................50
Reset the network settings to the factory default.....................................................................................51
Printing the Network Configuration List ...................................................................................................52
Printing the WLAN report (For MFC-9560CDW and MFC-9970CDW)....................................................53
Function table and default factory settings ..............................................................................................54
DCP-9055CDN, MFC-9460CDN and MFC-9465CDN ......................................................................54
MFC-9560CDW .................................................................................................................................57
DCP-9270CDN ..................................................................................................................................62
MFC-9970CDW .................................................................................................................................65
6 Web Based Management 71
Overview..................................................................................................................................................71
How to configure the machine settings using Web Based Management (web browser).........................72
Password information ..............................................................................................................................73
Secure Function Lock 2.0........................................................................................................................74
How to configure the Secure Function Lock 2.0 settings using Web Based Management
(web browser)................................................................................................................................75
Synchronize with SNTP server................................................................................................................77
Store Print Log to Network.......................................................................................................................79
How to configure the Store Print Log to Network settings using Web Based Management
(web browser)................................................................................................................................79
Error Detection Setting ......................................................................................................................81
Understanding Error Messages.........................................................................................................82
Using Store Print Log to Network with Secure Function Lock 2.0.....................................................83
Changing the Scan to FTP configuration using a web browser...............................................................83
Changing the Scan to Network configuration using a web browser ........................................................85
Changing the LDAP configuration using a web browser (For DCP-9270CDN and MFC-9970CDW) .....86