Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Definitions of notes
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network (For MFC-9560CDW and MFC-9970CDW)
- Overview
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network (Automatic Wireless mode) (Infrastructure mode only) (Recommended)
- Configuration using the machine’s control panel Setup Wizard to configure your machine for a wireless network
- Configuration using the Brother installer application on the CD-ROM to configure your machine for a wireless network
- Configuration using the PIN Method of Wi-Fi Protected Setup to configure your machine for a wireless network (Infrastructure mode only)
- Configuring your machine for a wireless network (For Infrastructure mode and Ad-hoc mode)
- Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network (Automatic Wireless mode)
- Using the Setup Wizard from the control panel
- Configuring your machine when the SSID is not broadcast
- Configuring your machine for an enterprise wireless network
- Using the Brother installer application on the CD-ROM to configure your machine for a wireless network
- Using the PIN Method of Wi-Fi Protected Setup
- 4 Wireless configuration using the Brother installer application (For MFC-9560CDW and MFC-9970CDW)
- 5 Control panel setup
- Network menu
- TCP/IP
- Ethernet (wired network only)
- Status (For DCP-9055CDN, DCP-9270CDN, MFC-9460CDN and MFC-9465CDN)/Wired Status (For MFC-9560CDW and MFC-9970CDW)
- Setup Wizard (wireless network only)
- WPS or AOSS™ (wireless network only)
- WPS w/PIN Code (wireless network only)
- WLAN Status (wireless network only)
- MAC Address
- Set to Default (For MFC-9560CDW and MFC-9970CDW)
- Wired Enable (For MFC-9560CDW and MFC-9970CDW)
- WLAN Enable (For MFC-9560CDW and MFC-9970CDW)
- E-mail / IFAX (MFC-9970CDW and DCP-9270CDN (E-mail only))
- Fax to Server (For MFC-9970CDW)
- How to set a new default for Scan to FTP
- How to set a new default for Scan to Network
- Reset the network settings to the factory default
- Printing the Network Configuration List
- Printing the WLAN report (For MFC-9560CDW and MFC-9970CDW)
- Function table and default factory settings
- Network menu
- 6 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Password information
- Secure Function Lock 2.0
- Synchronize with SNTP server
- Store Print Log to Network
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser
- Changing the LDAP configuration using a web browser (For DCP-9270CDN and MFC-9970CDW)
- 7 LDAP operation (For DCP-9270CDN and MFC-9970CDW)
- 8 Internet fax (For MFC-9970CDW)
- 9 Security features
- Overview
- Managing your network machine securely using SSL/TLS
- Printing documents securely using SSL/TLS
- Sending or Receiving an E-mail securely
- Using IEEE 802.1x authentication
- Secure Management using BRAdmin Professional 3 (Windows®)
- Using Certificates for device security
- Managing multiple certificates
- 10 Troubleshooting
- Appendix A
- Index
- Network Glossary
- Table of Contents
- 1 Types of network connections and protocols
- 2 Configuring your machine for a network
- 3 Wireless network terms and concepts
- 4 Additional network settings from Windows®
- 5 Security terms and concepts
- Appendix A
- Index
ii
1 Introduction 1
Network features........................................................................................................................................1
Other Network features .......................................................................................................................2
2 Changing your machine’s network settings 4
How to change your machine’s network settings (IP address, Subnet mask and Gateway).....................4
Using the control panel........................................................................................................................4
Using the BRAdmin Light utility ...........................................................................................................4
Other Management Utilities .......................................................................................................................7
Web Based Management (web browser) ............................................................................................7
BRAdmin Professional 3 utility (Windows
®
) ........................................................................................7
Web BRAdmin (Windows
®
).................................................................................................................8
BRPrint Auditor (Windows
®
)................................................................................................................8
3 Configuring your machine for a wireless network
(For MFC-9560CDW and MFC-9970CDW) 9
Overview....................................................................................................................................................9
Step by step chart for wireless network configuration ............................................................................10
For Infrastructure mode.....................................................................................................................10
For Ad-hoc mode...............................................................................................................................11
Confirm your network environment..........................................................................................................12
Connected to a computer with a WLAN access point/router in the network (Infrastructure mode) ...12
Connected to a wireless capable computer without a WLAN access point/router in the network
(Ad-hoc mode)...............................................................................................................................12
Confirm your wireless network setup method..........................................................................................13
Configuration using WPS or AOSS™ from the control panel menu to configure your machine
for a wireless network (Automatic Wireless mode) (Infrastructure mode only)
(Recommended)............................................................................................................................13
Configuration using the machine’s control panel Setup Wizard to configure your machine for a
wireless network............................................................................................................................13
Configuration using the Brother installer application on the CD-ROM to configure your machine
for a wireless network....................................................................................................................14
Configuration using the PIN Method of Wi-Fi Protected Setup to configure your machine
for a wireless network (Infrastructure mode only)..........................................................................16
Configuring your machine for a wireless network
(For Infrastructure mode and Ad-hoc mode) ........................................................................................17
Using WPS or AOSS™ from the control panel menu to configure your machine
for a wireless network (Automatic Wireless mode)........................................................................17
Using the Setup Wizard from the control panel .................................................................................17
Configuring your machine when the SSID is not broadcast ..............................................................18
Configuring your machine for an enterprise wireless network...........................................................23
Using the Brother installer application on the CD-ROM to configure your machine
for a wireless network....................................................................................................................30
Using the PIN Method of Wi-Fi Protected Setup ...............................................................................31
Table of Contents